Einleitung

Use this guide to remove the screen on your front panel assembly.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Power down the device and make sure that it is turned off.
    • Power down the device and make sure that it is turned off.

    • Insert the plastic opening tool into the bracket space on the back bottom left of the phone.

    • Gently twist tool clockwise until the back case pops open [this will create a small gap].

    • Slide the tool along the gap around the entire device.

    Kommentar hinzufügen

  2. Insert the plastic opening tool into the indent below the battery, and pry up to lift and remove the battery.
    • Insert the plastic opening tool into the indent below the battery, and pry up to lift and remove the battery.

    Kommentar hinzufügen

    • With a Phillips #000 screwdriver, remove the twelve 3mm screws.

    Kommentar hinzufügen

    • Create a gap with plastic opening tool by applying pressure between glass screen and plastic edge of device.

    • Slide prying tool around entire device beginning toward the top.

    • Lift off and remove the screen from the device.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 61

Insgesamt: 418