Repariere deine Sachen Community Store

LaCie Rugged USB-C Circuit Board Replacement

Was du brauchst

  1. LaCie Rugged USB-C Circuit Board Replacement, Overview: Schritt 1, Bild 1 von 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: Schritt 1, Bild 2 von 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: Schritt 1, Bild 3 von 3

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

    Bearbeiten

  2. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: Schritt 2, Bild 1 von 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: Schritt 2, Bild 2 von 2

    • Remove the rubber case around the drive. You can just stretch it off.

    Bearbeiten

  3. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: Schritt 3, Bild 1 von 2 LaCie Rugged USB-C Circuit Board Replacement, Case Screws: Schritt 3, Bild 2 von 2

    • Remove these 4x Torx T8 screws

    Bearbeiten

  5. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: Schritt 4, Bild 1 von 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: Schritt 4, Bild 2 von 2

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

    Bearbeiten

  6. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: Schritt 5, Bild 1 von 2 LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: Schritt 5, Bild 2 von 2

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

    Bearbeiten

  7. LaCie Rugged USB-C Circuit Board Replacement, Drive Removal: Schritt 6, Bild 1 von 1

    • Pull the drive gently out of the SATA connector.

    Bearbeiten

  8. LaCie Rugged USB-C Circuit Board Replacement, Screw Removal: Schritt 7, Bild 1 von 1

    • Remove this Phillips 00 screw from the board.

    Bearbeiten

  9. LaCie Rugged USB-C Circuit Board Replacement, Board Removal: Schritt 8, Bild 1 von 1

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 1 anderen Mitwirkenden

9021007

Mitglied seit: 07/13/18

4.599 Reputation

25 Anleitungen geschrieben

Auszeichnungen: 22

+ 19 weitere Auszeichnungen

3 Kommentare

Where can i get a new board? thank you

Bar Avraham - Antwort

Yes, where can we find a new board?

Vassilis Trigkas - Antwort

Right, where can the part be purchased?????

James Causey - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 21

Letzte 30 Tage: 59

Insgesamt: 1,419