Einleitung
The LeapFrog LeapPad 2 requires four (4) AA batteries which are easily replaced without any tools. The LeapPad 2 should be powered off before removal of the existing batteries.
-
-
Turn the tablet so the back is visible.
-
One at a time, remove the battery covers by sliding them towards the sides and away from the center of the device.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 1-5, Sullivan Fall 2016 Mitglied von USF Tampa, Team 1-5, Sullivan Fall 2016
USFT-SULLIVAN-F16S1G5
4 Mitglieder
18 Anleitungen geschrieben
