Einleitung
A guide on how to replace the camera in a LeapFrog LeapPad Ultimate.
Was du brauchst
-
-
Flip over the Pad to its back side to begin the removal of the back panel.
-
Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.
-
-
-
Once the blue rim is removed, the 12 screws will be visible.
-
Use the Phillips #1 screwdriver to unscrew all 12 screws.
-
-
-
-
Remove the ribbon on the bottom of the motherboard and the ribbon on the left side of the motherboard.
-
-
-
Flip the motherboard to its back side and pinch the 2 green hooks to remove the camera cover
-
-
-
Remove the ribbon connecting the camera to the motherboard. You have now taken out the camera and can replace it with a new one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
University of North Texas, Team S1-G13, Riccardelli Fall 2018 Mitglied von University of North Texas, Team S1-G13, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S1G13
4 Mitglieder
12 Anleitungen geschrieben
