Einleitung
The guide will show you how to remove and replace the RAM module that comes with the laptop. Be sure the new replacement module is compatible with the motherboard.
Was du brauchst
-
-
Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.
-
-
-
Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.
-
Disconnect the battery connector from the motherboard.
-
-
-
-
Pull the battery outward and remove it from the rest of the laptop.
The removal of the hard drive isn’t completely necessary in order to access the hard drive for removal.
-
-
-
With both of your thumbs, gently pull both adjacent levers outwards. The RAM module will rise a bit.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S14-G1, Boczar Fall 2017 Mitglied von USF Tampa, Team S14-G1, Boczar Fall 2017
USFT-BOCZAR-F17S14G1
4 Mitglieder
5 Anleitungen geschrieben
2 Kommentare
but how exactly do i open the cover?
