Zum Hauptinhalt wechseln

Lenovo Essential G555-0873 Heat Sink Replacement

Was du brauchst

  1. Lenovo Essential G555-0873 Heat Sink Replacement, Bottom Panel: Schritt 1, Bild 1 von 1
    • Unscrew the two 5.1 mm screws that secure the bottom cover.

    • Note that the screws will not come all the way out of the sockets.

  2. Lenovo Essential G555-0873 Heat Sink Replacement: Schritt 2, Bild 1 von 1
    • Lift from the notch until the back panel comes up.

  3. Lenovo Essential G555-0873 Heat Sink Replacement, Fan: Schritt 3, Bild 1 von 1
    • Disconnect the fan from the motherboard by pulling the plug shown in the picture.

  4. Lenovo Essential G555-0873 Heat Sink Replacement: Schritt 4, Bild 1 von 1
    • Unscrew the three 4.6mm screws shown in the picture.

  5. Lenovo Essential G555-0873 Heat Sink Replacement: Schritt 5, Bild 1 von 1
    • Gently lift the fan straight up until it is lifted out of the case.

  6. Lenovo Essential G555-0873 Heat Sink Replacement, Heat Sink: Schritt 6, Bild 1 von 1
    • Unscrew the four 7.3 mm screws shown in the picture.

    • Note that springs are attached to the screws. Do not remove the springs.

  7. Lenovo Essential G555-0873 Heat Sink Replacement: Schritt 7, Bild 1 von 2 Lenovo Essential G555-0873 Heat Sink Replacement: Schritt 7, Bild 2 von 2
    • Pull the heat sink assembly out of the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Ein Kommentar

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 145