Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Turn off the laptop.

    • Disconnect the charging cable.

    • Failure to unplug the cable could result in electric shock.

    • Turn the computer upside down.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 2 : Schritt 2, Bild 2 von 2
    • Locate the two switches that lock the battery.

    • Push the right switch outwards to unlock the battery.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 2 : Schritt 3, Bild 2 von 2
    • Push and hold the left switch outwards to unlock the battery.

    • Pull the battery away from the computer.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 1
    • Turn the laptop over so that the bottom side is facing up.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 1
    • Unscrew the five 5mm Phillips #0 screws that hold the cover in place.

    • The screws do not come out fully from the back plate. They stay attached to the plate itself.

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 3 : Schritt 6, Bild 2 von 3 : Schritt 6, Bild 3 von 3
    • With the screws removed, insert the plastic opening tool into the groove located on the right side.

    • Begin to pry up, and the plate should lift up from the body of the laptop.

    • While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.

  7. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 7, Bild 1 von 1
    • Remove the two 9mm Phillips #0 screws.

    • Remove the single 5mm Phillips #0 screw.

    • All 3 screws are located next to keyboard icons.

  8. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 8, Bild 1 von 2 : Schritt 8, Bild 2 von 2
    • Flip the computer over and open it.

    • Using the plastic opening tool, pry open the top of the keyboard.

  9. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 9, Bild 1 von 1
    • Remove the keyboard by gently pulling the top of the keyboard loose, and then lifting the keyboard out.

    • Be careful lifting the keyboard up because there is a delicate ribbon cable connected to the bottom.

  10. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 10, Bild 1 von 3 : Schritt 10, Bild 2 von 3 : Schritt 10, Bild 3 von 3
    • While lifting the keyboard, push the black latch on the keyboard cable ZIF connector forward to unlock it.

    • Carefully pull away the ribbon cable to detach it from the motherboard.

    • Be careful when unlatching the lock on the keyboard cable ZIF connector. It is extremely delicate and can easily break.

Ziellinie

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Nina Francisco

Mitglied seit: 03/01/18

385 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team S1-G1, Simcock Spring 2018 Mitglied von UMass Dartmouth, Team S1-G1, Simcock Spring 2018

UMASSD-SIMCOCK-S18S1G1

3 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 4

Letzte 30 Tage: 14

Insgesamt: 2,426