Einleitung
This requires a phillips head screwdriver only. Be sure to not drop the screws into the computer.
Was du brauchst
-
-
Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
-
-
-
Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
-
-
-
Remove the two screws on the bottom of the computer, one on each side.
-
-
-
-
Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.