Repariere deine Sachen Community Store

Lenovo Ideatab S6000 Motherboard Replacement

Einleitung

How to remove the motherboard from the device.

Was du brauchst

  1. Lenovo Ideatab S6000 Motherboard Replacement, Battery: Schritt 1, Bild 1 von 1

    • Remove the speaker screens by working them loose with a plastic opening tool. You may need to first loosen them with tweezers or a craft knife.

    • These screens are held in place by glue that is hard to remove. Please take your time to ensure that that this step is done correctly.

    Bearbeiten

    I little bit of heat goes a long way when taking off the speaker screens.

    iHelpU.Tech - Antwort

  2. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 2, Bild 1 von 1

    • Remove the screws from both of the spots that were covered.

    Bearbeiten

  3. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 3, Bild 1 von 1

    • DO NOT USE A METAL TOOL FOR THIS.

    • Go all around the casing, prying the screen away from the backing with the spudger.

    • It will make a popping sound each time one of the lock tabs is disconnected.

    • Take your time as you move all around the device when prying the backing off.

    Bearbeiten

  4. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 4, Bild 1 von 1

    • Pull off the plastic that is covering the battery cable.

    Bearbeiten

  5. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 5, Bild 1 von 2 Lenovo Ideatab S6000 Motherboard Replacement: Schritt 5, Bild 2 von 2

    • Using either the plastic opening tool or your fingers, gently pull on both sides of the plug to release it.

    Bearbeiten

  6. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 6, Bild 1 von 1

    • Remove the battery by grabbing the tab shown and pulling up.

    • The battery is held to the device by adhesive. Pull the battery up from the tab and it will lift out with a bit of effort.

    Bearbeiten

    MERCI POUR LE TUTORIEL, et courage pour vulgariser la technique!

    KISANTU - Antwort

  8. Lenovo Ideatab S6000 Motherboard Replacement, Speakers: Schritt 7, Bild 1 von 3 Lenovo Ideatab S6000 Motherboard Replacement, Speakers: Schritt 7, Bild 2 von 3 Lenovo Ideatab S6000 Motherboard Replacement, Speakers: Schritt 7, Bild 3 von 3

    • The speakers are connected to the tablet by glue and require a lot of prying to remove.

    • Make sure to get all the way under the speakers when prying.

    Bearbeiten

  9. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 8, Bild 1 von 2 Lenovo Ideatab S6000 Motherboard Replacement: Schritt 8, Bild 2 von 2

    • This step is not necessary if you aren't replacing the speakers.

    • To the remove the wires heat the solder connecting the wires to the board, and gently pull on the wires.

    • Remember the placement of the red and black wires.

    • Connect new speakers by soldering the wires onto the board.

    Bearbeiten

  10. Lenovo Ideatab S6000 Motherboard Replacement, Vibration Motor: Schritt 9, Bild 1 von 1

    • Use the spudger to pry up the vibration motor.

    Bearbeiten

  11. Lenovo Ideatab S6000 Motherboard Replacement, Motherboard: Schritt 10, Bild 1 von 1

    • Remove the 3.16mm screws highlighted in red

    Bearbeiten

  12. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 11, Bild 1 von 1

    • Force the ribbon cables out by pulling up the cables through the use of the plastic opening tool.

    Bearbeiten

  13. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 12, Bild 1 von 1

    • Flip the black tab up to unlock the cables by using the plastic opening tool.

    Bearbeiten

  14. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 13, Bild 1 von 1

    • Remove the piece of tape by pulling it up through the use of your hand.

    Bearbeiten

  15. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 14, Bild 1 von 2 Lenovo Ideatab S6000 Motherboard Replacement: Schritt 14, Bild 2 von 2

    • Remove the tape by pulling it up through the use of the plastic opening tool.

    Bearbeiten

  16. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 15, Bild 1 von 2 Lenovo Ideatab S6000 Motherboard Replacement: Schritt 15, Bild 2 von 2

    • Unlike the other small connectors this one does not flip up. You need to pull the connector cable to release this

    • Lift the tab by pulling it up with your hand.

    Bearbeiten

    On this connector, the white portion of the tab lifts up rather than the black portion.

    jpkennard - Antwort

    Don't forget the Camera connector on the opposite side! :) Almost missed him.

    Mikel Farley - Antwort

  17. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 16, Bild 1 von 1

    • Lift up the cables connected to the tab by using the spudger tool.

    Bearbeiten

  18. Lenovo Ideatab S6000 Motherboard Replacement: Schritt 17, Bild 1 von 1

    • Remove the tablet's Motherboard by lifting it up with your hands.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

8 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 6 anderen Mitwirkenden

Josiah Speed

Mitglied seit: 09/22/14

965 Reputation

4 Anleitungen geschrieben

Auszeichnungen: 16

+ 13 weitere Auszeichnungen

Team

USF Tampa, Team 10-4, Brown Fall 2014 Mitglied von USF Tampa, Team 10-4, Brown Fall 2014

USFT-BROWN-F14S10G4

4 Mitglieder

10 Anleitungen geschrieben

3 Kommentare

Just followed this on my father's tablet, worked like a charm!

One step missing, there's a connector for the camera between steps 16 and 17 that needs pried up before taking the board off.

Other than that THANK YOU!!! :)

Mikel Farley - Antwort

Any schematics or board view for this board out there?

DANIEL HOCH - Antwort

Best purchase of mother board?

Terry Williams - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 8,191