Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The wireless module allows your computer to connect to the internet via WiFi.
Was du brauchst
-
-
Using a T5 Torx screwdriver, remove the eleven 1/4" screws from the back of the laptop.
-
-
-
-
Locate the wireless module above the battery in the top left corner of the computer.
-
Using a spudger, disconnect the two metal connectors by popping the metal piece up from the wireless module.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 12-14, Maness Fall 2015 Mitglied von Cal Poly, Team 12-14, Maness Fall 2015
CPSU-MANESS-F15S12G14
5 Mitglieder
12 Anleitungen geschrieben
2 Kommentare
Great info on this
Be careful, there is a very restrictive Whitelist in the BIOS for potential replacements, unofficial support available via their forums;
(tl;dr - go with Intel AC 7260 - m.2 connection)
