Lenovo Yoga 710-15IKB Solid State Drive Replacement

Einleitung

Solid state drives are known to fail occasionally, but this doesn't mean you have to do away with your laptop entirely. Replacing a bad drive is as simple as removing the battery and a single screw. Failure can be caused by heat, voltage fluctuation, and age.

Was du brauchst

Schritt 1 Battery

Lenovo Yoga 710-15IKB Solid State Drive Replacement, Battery: Schritt 1, Bild 1 von 1

Ensure your computer is completely OFF before starting this guide.
Remove the ten 3.3 mm T5 screws from the base cover.
The screws aren't all the same length. Be sure to keep the screws sorted as you work.

Bearbeiten

¿Son Vdes. conscientes de que están haciendo una mala traducción del inglés? Están traduciendo “remove”, que en castellano se traduce por retirar, como remover, que en inglés se traduce por “stir”. No aconsejo remover los tornillos ni las baterías.

stuart.medina - 10. Okt 2020 Antwort

Be cognizant of which screws come from which locations. I did not notice that three of the screws were longer than the others. I ended up reinstalling mine along the hinge side of the back cover.

jcorrell68 - 2. Nov 2021 Antwort

Thanks for the tip! I’ll add that into the guide.

Arthur Shi - 5. Nov 2021

Schritt 2

Slide an opening tool between the base and back cover and work your way around the entire device to release the back cover.

Bearbeiten

Wow, this is extremely difficult. Wondering why Lenovo didn’t provide small grooves to simplify this process. This is my first and last time purchasing a Lenovo. I’ve experienced so many issue with this laptop

Feleisa - 23. Apr 2020 Antwort

Schritt 3

Lift and remove the back cover.

Bearbeiten

Schritt 4

Remove the four 3.5 mm screws around the battery using a Phillips #1 screwdriver.

Bearbeiten

The ones in mine were a Philips #1

Phil - 11. Sep 2020 Antwort

The screws securing my battery were also PH1. Be careful as it would be extremely easy to strip the heads on these screws using the incorrect size.

jcorrell68 - 2. Nov 2021 Antwort

Thanks! I’ll update the step to reflect this.

Arthur Shi - 5. Nov 2021

Schritt 5

Disconnect the battery by pulling its cable away from the hinge with a pair of tweezers or your fingers.

Bearbeiten

There is no latch or anything. Just pull it out gently towards the battery.

Brian Sheppard - 7. Feb 2019 Antwort

I had to put a bit of elbow grease and patience into this step. Looking at the replacement battery as reference help to understand what would work best

Feleisa - 23. Apr 2020 Antwort

This step made me nervous! I wasn't sure how much elbow grease to use. It took a good firm horizontal yank, holding the cord near the plug. It's probably not a good idea to yank it by grasping the battery.

Kyrsten Wilson - 21. Mai 2020 Antwort