Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

If your Lenovo Yoga 720-15IKB (88YG7000828‎) is not recognizing any wireless signals or having trouble connecting to Wi-Fi, use this guide to replace the wireless adapter. For more information on these symptoms, refer to the troubleshooting guide.

To complete this repair you’ll need a Torx T5 and a Phillips #0 screwdriver.

  1. Power off the device before starting. Flip the device over with the hinges facing away from you. Remove seven 5.0 mm Torx T5 screws.
    • Power off the device before starting.

    • Flip the device over with the hinges facing away from you.

    • Remove seven 5.0 mm Torx T5 screws.

    • Remove three 9.5 mm Torx T5 screws.

  2. Pry around the edges from one side to another with a plastic opening tool. Do not pry on the side with the hinges because this can break the cover.
    • Pry around the edges from one side to another with a plastic opening tool.

    • Do not pry on the side with the hinges because this can break the cover.

    • Lift the case from the front until you feel resistance.

    • Do not keep lifting after you feel resistance, or the bottom cover can break.

    • Pull the cover towards you, away from the hinges.

    • Completely lift off the cover.

  3. EINFACH ALLE TABS ÖFFNEN

    RAM Upgrade Kits für Mac

    Kits kaufen

    Genügend RAM
    für alle Tabs

    Kits kaufen
  4. Lift the foam covering the connecting wires and screw, and use the Phillips #0 screwdriver to remove the 2mm screw. Lift the foam covering the connecting wires and screw, and use the Phillips #0 screwdriver to remove the 2mm screw. Lift the foam covering the connecting wires and screw, and use the Phillips #0 screwdriver to remove the 2mm screw.
    • Lift the foam covering the connecting wires and screw, and use the Phillips #0 screwdriver to remove the 2mm screw.

  5. Grab the adapter from both sides and pull towards the hinge to remove the adapter from the device.
    • Grab the adapter from both sides and pull towards the hinge to remove the adapter from the device.

  6. Remove the black and white wires from the adapter by pulling up on each wire.
    • Remove the black and white wires from the adapter by pulling up on each wire.

    • When reassembling, make sure to press each wire connector firmly onto the new adapter to make sure it is a secure fit.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Matthew Bornhorst

Mitglied seit: 23.01.2020

300 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team S19-G3, White Winter 2020 Mitglied von Cal Poly, Team S19-G3, White Winter 2020

CPSU-WHITE-W20S19G3

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 5

Letzten 30 Tage: 37

Insgesamt: 141