Zum Hauptinhalt wechseln

Levoit LV-H132 Springs Replacement

Was du brauchst

  1. Levoit LV-H132 Springs Replacement, Springs: Schritt 1, Bild 1 von 2 Levoit LV-H132 Springs Replacement, Springs: Schritt 1, Bild 2 von 2
    • Pry off the plastic top using a metal spudger.

  2. Levoit LV-H132 Springs Replacement: Schritt 2, Bild 1 von 2 Levoit LV-H132 Springs Replacement: Schritt 2, Bild 2 von 2
    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

  3. Levoit LV-H132 Springs Replacement: Schritt 3, Bild 1 von 2 Levoit LV-H132 Springs Replacement: Schritt 3, Bild 2 von 2
    • Disconnect the top half from the bottom.

  4. Levoit LV-H132 Springs Replacement: Schritt 4, Bild 1 von 3 Levoit LV-H132 Springs Replacement: Schritt 4, Bild 2 von 3 Levoit LV-H132 Springs Replacement: Schritt 4, Bild 3 von 3
    • Disconnect the circuit board cable.

  5. Levoit LV-H132 Springs Replacement: Schritt 5, Bild 1 von 2 Levoit LV-H132 Springs Replacement: Schritt 5, Bild 2 von 2
    • Remove the two 5 mm screws with a Phillips #1 screwdriver.

  6. Levoit LV-H132 Springs Replacement: Schritt 6, Bild 1 von 1
    • Desolder the joints holding the springs.

    • Slide out the faulty springs.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kris Sathwara

Mitglied seit: 09/14/23

133 Reputation

1 Anleitung geschrieben

Team

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 75