Einleitung

If, after reading through this guide, you are still in need of assistance, please refer back to the device page or the troubleshooting page.

Unfold the antennas straight away from the device.
  • Unfold the antennas straight away from the device.

Kommentar hinzufügen

Remove the black caps from the antennas by pulling them away from the device. Remove the black caps from the antennas by pulling them away from the device. Remove the black caps from the antennas by pulling them away from the device.
  • Remove the black caps from the antennas by pulling them away from the device.

Kommentar hinzufügen

Unscrew each of the antennas from the wireless device. Unscrew each of the antennas from the wireless device. Unscrew each of the antennas from the wireless device.
  • Unscrew each of the antennas from the wireless device.

Kommentar hinzufügen

Using a bit of force, remove the blue plastic case. Using a bit of force, remove the blue plastic case.
  • Using a bit of force, remove the blue plastic case.

Kommentar hinzufügen

To remove the black casing that surrounds the green motherboard, slide the top half of the casing backwards. It only moves a very short distance. Pull the top piece upwards and away from the bottom to remove.
  • To remove the black casing that surrounds the green motherboard, slide the top half of the casing backwards. It only moves a very short distance.

  • Pull the top piece upwards and away from the bottom to remove.

Kommentar hinzufügen

Locate the 2 M2.5x6mm screws that attach the motherboard to the back case. Remove the two screws from the motherboard as indicated with the Phillips head screwdriver.
  • Locate the 2 M2.5x6mm screws that attach the motherboard to the back case.

  • Remove the two screws from the motherboard as indicated with the Phillips head screwdriver.

Kommentar hinzufügen

Once screws have been removed, slide the motherboard in the direction of its LED lights.
  • Once screws have been removed, slide the motherboard in the direction of its LED lights.

  • Lift motherboard up and away from the black lower casing.

Kommentar hinzufügen

Kommentar hinzufügen

Identify the functional component which will be removed. Turn the board over so that the pins holding the component in are exposed.
  • Identify the functional component which will be removed.

  • Turn the board over so that the pins holding the component in are exposed.

Kommentar hinzufügen

Desolder each pin using the iFixit Soldering Guide (Wie man Lötverbindungen herstellt und entlötet). Gently remove functional component for replacement.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Nicole C

Mitglied seit 12.10.2011

102 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 17-7, Regan Fall 2011 Mitglied von Cal Poly, Team 17-7, Regan Fall 2011

CPSU-REGAN-F11S17G7

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 18

Insgesamt: 3,279