Einleitung

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

Unplug the device to avoid injury.
  • Unplug the device to avoid injury.

  • Use a Phillips head screwdriver to unscrew the single screw.

  • Hold on to the nut from the other side so you do not lose it.

  • Remove the panel that conceals the switch.

Kommentar hinzufügen

Hold on to the red disc with needle nosed pliers and use the Phillip's head screwdriver to remove the disc by pushing down.
  • Hold on to the red disc with needle nosed pliers and use the Phillip's head screwdriver to remove the disc by pushing down.

Kommentar hinzufügen

  • Remove and replace the white switch.

    • Do not be afraid to pull as this takes a bit of force to remove.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

Mitglied seit 14.01.2014

354 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 17-3, Forte Winter 2014 Mitglied von Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 426