Repariere deine Sachen Community Store

Logitech Dual Action Joystick Replacement

Einleitung

If the joystick on your Logitech Dual Action controller isn't working properly, refer to the guide to walk you through how to replace the joystick on your Logitech Dual Action controller.

The joystick is an essential part of any controller. A faulty joystick will result in difficulty navigating any software you may encounter where you will need the joystick.

Ensure your controller is disconnected from the power source before beginning your replacement.

Was du brauchst

  1. Logitech Dual Action Joystick Replacement, Taking out the screws: Schritt 1, Bild 1 von 1

    • To get into the controller, you will need to unscrew the 7 screws on the back.

    • You will have to remove the bottom oval sticker to reveal the screw marked with orange.

    Bearbeiten

  2. Logitech Dual Action Joystick Replacement, Opening the controller: Schritt 2, Bild 1 von 3 Logitech Dual Action Joystick Replacement, Opening the controller: Schritt 2, Bild 2 von 3 Logitech Dual Action Joystick Replacement, Opening the controller: Schritt 2, Bild 3 von 3

    • With the screws removed, turn the controller upside down and separate the front end from the back end.

    • It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go.

    • There should be the 4 circular buttons labeled 1-4, 4 smaller circular buttons for the D-Pad, and 3 rounded rectangular buttons.

    Bearbeiten

  3. Logitech Dual Action Joystick Replacement, Replacing the joystick: Schritt 3, Bild 1 von 2 Logitech Dual Action Joystick Replacement, Replacing the joystick: Schritt 3, Bild 2 von 2

    • With the case off, the joysticks can be removed by pulling them upward.

    • To put the replacement joystick on, align the hole at the bottom of the joystick with the rectangular peg and gently push down.

    • Make sure that the cut-out side of the joystick is towards the outsides of the device.

    Bearbeiten

    Where can we find the replacement Analogue Sticks

    shivam sah - Antwort

    <a href="https://www.w3schools.com/">Visit W3Schools.com!</a> foe complete network innfoemarion on the website

    nirik - Antwort

Ziellinie

14 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 5 anderen Mitwirkenden

Brian Neuman

Mitglied seit: 01/20/15

893 Reputation

3 Anleitungen geschrieben

Auszeichnungen: 10

+ 7 weitere Auszeichnungen

Team

USF Tampa, Team 7-4, Remmell Winter 2015 Mitglied von USF Tampa, Team 7-4, Remmell Winter 2015

USFT-REMMELL-W15S7G4

4 Mitglieder

3 Anleitungen geschrieben

5 Kommentare

Can the Analogue Stick be replaced with the One of XBOX 360 or PS3 Controller

shivam sah - Antwort

will the buttons still work if you put it all back?

Atsuku - Antwort

When you press the buttons, they don't work, but when you press hard, they only work, and they don't work just by pressing normally?

[deleted] - Antwort

Merci pour le site.excusez moi pour le dérangement j'ai ma manette PS2 qui ne fonctionne pas quand je branche ça me dit que c'est pas connecté

Mohamed Abass Sylla - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 19

Letzte 30 Tage: 160

Insgesamt: 9,840