Einleitung
Are your video recording's lacking audio or experiencing audio distortion? Try replacing the microphone to solve this problem.
Was du brauchst
-
-
Remove the LED foam ring with tweezers.
-
-
-
-
Use tweezers to disconnect the microphone wires from the internal components of camera.
-
-
-
Remove the 4mm Flathead #4 screw on the bottom of the camera.
-
Remove the weatherproof gasket around the microphone with tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 16-1, Eyestone Fall 2016 Mitglied von USF Tampa, Team 16-1, Eyestone Fall 2016
USFT-EYESTONE-F16S16G1
4 Mitglieder
12 Anleitungen geschrieben
