Zum Hauptinhalt wechseln

Lorex LW2742 Night Vision IR LEDs Replacement

Was du brauchst

  1. Lorex LW2742 Night Vision IR LEDs Replacement, Night Vision IR LEDs: Schritt 1, Bild 1 von 2 Lorex LW2742 Night Vision IR LEDs Replacement, Night Vision IR LEDs: Schritt 1, Bild 2 von 2
    • Remove the six 10mm Torx T10 screws on the camera face.

  2. Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 2, Bild 1 von 1
    • Remove the exterior lens cover.

  3. Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 3, Bild 1 von 3 Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 3, Bild 2 von 3 Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 3, Bild 3 von 3
    In diesem Schritt verwendetes Werkzeug:
    Tweezers
    $4.99
    Kaufen
    • Remove the LED foam ring with tweezers.

    • Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

  4. Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 4, Bild 1 von 2 Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 4, Bild 2 von 2
    • Remove the two 5mm Phillips #1 screws.

    • Remove the two 8mm Phillips #0 screws.

    • When reassembling, tighten the top and bottom 5mm screws first, followed by the left and right 8mm screws.

  5. Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 5, Bild 1 von 2 Lorex LW2742 Night Vision IR LEDs Replacement: Schritt 5, Bild 2 von 2
    • Use tweezers to unclip the cables to the LED board

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 16-1, Eyestone Fall 2016 Mitglied von USF Tampa, Team 16-1, Eyestone Fall 2016

USFT-EYESTONE-F16S16G1

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 16

Insgesamt: 1,002