Einleitung

This guide shows how to remove the battery cover and battery of this device. It shows the location of the screw and where to insert the spudger.

Remove the 5.0mm screw using the Phillips #0 head screwdriver.
  • Remove the 5.0mm screw using the Phillips #0 head screwdriver.

Kommentar hinzufügen

Insert metal spudger as shown in the picture. Move spudger along  to the other side until both snaps come loose.
  • Insert metal spudger as shown in the picture. Move spudger along to the other side until both snaps come loose.

Kommentar hinzufügen

  • Picture shows the removed battery cover.

Kommentar hinzufügen

  • Slide the battery out by pulling on one of two plastics tabs.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Yancey Crase

Mitglied seit 26.03.2018

217 Reputation

2 Anleitungen geschrieben

Team

IUPUI, Team S1-G4, Harley Spring 2018 Mitglied von IUPUI, Team S1-G4, Harley Spring 2018

IUPUI-HARLEY-S18S1G4

7 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 7

Insgesamt: 60