Zum Hauptinhalt wechseln

Einleitung

Looking to replace your fan? This guide will help you do so with only a couple steps.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Flip the device over so the back is facing up.
    • Flip the device over so the back is facing up.

  2. Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver. There is a screw located under the battery; lift the battery up to access it.
    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

  3. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  4. Once all four screws are removed, lift the back off. Once all four screws are removed, lift the back off.
    • Once all four screws are removed, lift the back off.

  5. Remove the  three 5 mm screws from the fan with a Phillips #00 screwdriver. Remove the  three 5 mm screws from the fan with a Phillips #00 screwdriver.
    • Remove the three 5 mm screws from the fan with a Phillips #00 screwdriver.

  6. Pull the wire on the bottom left of the fan out of the socket. Pull the wire gently; pulling too hard could damage the wire. Pull the wire gently; pulling too hard could damage the wire.
    • Pull the wire on the bottom left of the fan out of the socket.

    • Pull the wire gently; pulling too hard could damage the wire.

  7. Remove the fan. Remove the fan.
    • Remove the fan.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Zoey Calcagno

Mitglied seit: 04.10.2018

636 Reputation

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 5

Letzte 30 Tage: 28

Insgesamt: 276