Einleitung
Replacing the optical drive is straight forward and all you need is a Phillips head screw driver. Use this guide to replace the optical drive in your Mac Pro.
Was du brauchst
-
-
-
Firmly grasp the handles of the shown compartment and pull out firmly to remove the optical drive bay.
-
-
-
Firmly hold each of the two connectors and pull them out of their respective sockets.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
20 weitere Nutzer:innen haben diese Anleitung absolviert.
6 Kommentare
Thanks! It had been a long time since I'd been inside my towers! Easy-peasy!