Einleitung
Prereq for upper case (logic board is removed)
Was du brauchst
-
-
Remove the inner two 5.6 mm T8 Torx screws securing the right display hinge to the upper case.
-
-
-
-
While holding the Air steady, remove the remaining 5.6 mm T8 Torx screw from the display bracket.
-
-
-
Open the Air slowly until the hinges slide out of their notches.
-
Once the two display hinges have cleared the upper case, remove the display and set it aside.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.