Zum Hauptinhalt wechseln

MacBook Air 13" Mid 2013 Display Assembly Replacement

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. MacBook Air 13" Mid 2013 Display Assembly Replacement, Display Assembly: Schritt 1, Bild 1 von 1
    • Remove the inner two 4.9 mm T8 Torx screws securing the right display hinge to the upper case.

    • Leaving the third screw in place for now will aid in rest of the procedure.

  2. MacBook Air 13" Mid 2013 Display Assembly Replacement: Schritt 2, Bild 1 von 1
    • Open the display so that it is perpendicular to the upper case and place it on a table as shown.

  3. MacBook Air 13" Mid 2013 Display Assembly Replacement: Schritt 3, Bild 1 von 1
    • While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the display bracket.

  4. MacBook Air 13" Mid 2013 Display Assembly Replacement: Schritt 4, Bild 1 von 1
    • Flip the computer over so the last display screw is more easily accesible.

    • Before removing the final display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.

    • Remove the last 4.9 mm T8 Torx screw securing the display to the upper case.

  5. MacBook Air 13" Mid 2013 Display Assembly Replacement: Schritt 5, Bild 1 von 3 MacBook Air 13" Mid 2013 Display Assembly Replacement: Schritt 5, Bild 2 von 3 MacBook Air 13" Mid 2013 Display Assembly Replacement: Schritt 5, Bild 3 von 3
    • Open the Air slowly until the hinges slide out of their notches.

    • Once the two display hinges have cleared the upper case, remove the display and set it aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 149