Einleitung
Voraussetzung beim Ausbau des oberen Gehäuses
Was du brauchst
-
-
Der linke Lautsprecher ist am oberen Gehäuse festgeklebt. Löse ihn mit dem flachen Ende des Spudgers ab.
-
Entferne den linken Lautsprecher vom oberen Gehäuse.
-
-
-
-
Das Mikrofon ist an der linken Seite des oberen Gehäuses festgeklebt. Löse es mit dem flachen Ende des Spudgers ab.
-
Benutze, falls nötig, einen iOpener oder einen Haartrockner, um den Klebstoff etwas zu erwärmen.
-
Entferne das Mikrofon vom oberen Gehäuse.
If you’re replacing a top case with one provided by Apple, you won’t need to transfer the microphone to the new top case.
Hot air really helps here.
I really sweated over removing the microphone, but as Carroll mentioned, it’s not necessary since it was supplied with the iFixit upper case. Thanks, because it was a b*tch to remove and I probably damaged it in the process. Even with heat.
I did not have a mic in my Ifixit. Am I assuming I need to put it back? with adhesive
-
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Besonderer Dank geht an diese Übersetzer:innen:
100%
VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›
Not necessary to remove this. I was replacing a top case that included the speakers.
Same as the speaker in Step 29, which seems like it can also be left in place.
Tito Jankowski - Antwort
This step is required only if also replacing the keyboard.
airshack - Antwort
Replacing the entire top case is not necessary with the common spilled beverage situations. You can purchase a trackpad as well as keyboard for much less than the cost of an entirely new top case. Why replace the expensive aluminum top case unless it is itself broken which is unlikely.
airshack - Antwort
Airshack, this is not true for all models of the MacBook Air or the MacBook Pro
phil3 - Antwort
If it is difficult to remove the speakers you can use Isopropyl Alcohol to loosen the adhesive holding the speakers in place. Make sure to keep the Isopropyl Alcohol away from the speaker itself.
BluRepairs - Antwort