Zum Hauptinhalt wechseln

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

Was du brauchst

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: Schritt 1, Bild 1 von 1
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: Schritt 2, Bild 1 von 2 MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: Schritt 2, Bild 2 von 2
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

85 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

16.562 Anleitungen geschrieben

7 Kommentare

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - Antwort

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - Antwort

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 36

Letzte 30 Tage: 183

Insgesamt: 64,783