Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

Alles was du zum Entfernen des Akkus brauchst sind deine Finger !

Werkzeuge

Keine Werkzeuge angegeben.

  1. Benutze deine Finger und drücke bzw. ziehe die beiden Entriegelungslaschen vom Akku weg, und hebe den Akku aus dem Computer. Benutze deine Finger und drücke bzw. ziehe die beiden Entriegelungslaschen vom Akku weg, und hebe den Akku aus dem Computer. Benutze deine Finger und drücke bzw. ziehe die beiden Entriegelungslaschen vom Akku weg, und hebe den Akku aus dem Computer.
    • Benutze deine Finger und drücke bzw. ziehe die beiden Entriegelungslaschen vom Akku weg, und hebe den Akku aus dem Computer.

    Before start, make a clone of your old HD into the new one, if you don't want to initiate a fresh copy. (Carbon Copy software is good).

    ColmillodeChile - Antwort

    Besides using WD 500GB models, are the WD 640GB and WD 750GB (the 9.5mm thickness model) good to go for? I am still considering as I have heard from other websites on the computer does not draw enough power to power up the 640 and 750 as it has the clicking sound and the rainbow keeps appearing. Anyone has install one before yet?

    Please advice. Appreciated! Thanks a million to all the Mac gurus out there!

    Danny Lim -

    Zitat von ColmillodeChile:

    Before start, make a clone of your old HD into the new one, if you don't want to initiate a fresh copy. (Carbon Copy software is good).

    What is this about removing the PRAM battery causing a reinitialization of the HDD? For serious?

    Adrian - Antwort

    No, that's nonsense

    max damage -

    Zitat von Adrianthomaspre:

    What is this about removing the PRAM battery causing a reinitialization of the HDD? For serious?

    Wait, I misunderstood you. I thought the comment was directed at the PRAM battery removal page. Silly me.

    Nevermind. Yes, it is always a good idea to backup one's data before doing stuff like this. I never do, and have never had any problems, but it's still a good idea.

    Adrian - Antwort

    The two screws removed in step 3 should not be mixed with screws in steps 5 through 7. Though similar, they are actually slightly shorter and have a bigger head. If you put the longer screws back in here when reassembling, the button to unlatch the top will not work properly.

    Doug - Antwort

    Zitat von Doug:

    The two screws removed in step 3 should not be mixed with screws in steps 5 through 7. Though similar, they are actually slightly shorter and have a bigger head. If you put the longer screws back in here when reassembling, the button to unlatch the top will not work properly.

    I think you may have commented on the wrong page. This page only has 3 steps, and the screws are removed in step 2, not 3.

    (MacBook Pro 15" Core 2 Duo Models A1226 and A1260 RAM Replacement)

    Don - Antwort

    I'm not sure how the user notes get attached to the various procedures here, but my comment does seem to show up properly when viewing the steps for Hard Drive Replacement. However, the number of the step may be off if viewed as part of another procedure.

    Zitat von Don:

    I think you may have commented on the wrong page. This page only has 3 steps, and the screws are removed in step 2, not 3.

    (MacBook Pro 15" Core 2 Duo Models A1226 and A1260 RAM Replacement)

    Doug - Antwort

Abschluss

Um dein Gerät wieder zusammenzusetzen, folge dieser Anleitung in umgekehrter Reihenfolge.

77 weitere Nutzer haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer*innen:

100%

Diese Übersetzer*innen helfen uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Beginne zu übersetzen ›

Help! After installing new battery, one of the tabs does not close totally, leaving a bit or orange showing, and mouse pad is hardly operational. Cannot seem to get it to install completely. Put old battery back in to double check and its fine. Tried new battery 3 times to no avail!! Any tips?? Thank you!

Carolyn Smith - Antwort

Mmm, I think in two options:

1. The new battery has some imperfections and don´t met the official dimensions.

2. If the new battery is used, had an overheat and that caused a variation in its dimensions.

Sorry if I can´t help you more

ColmillodeChile - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 7

Letzten 7 Tage: 28

Letzten 30 Tage: 128

Insgesamt: 49,959