Zum Hauptinhalt wechseln

Einleitung

Der Austausch des Akkus in einem MacBook Pro Unibody geht leicht.

Werkzeuge

Keine Werkzeuge angegeben.

  1. Platziere das Gerät umgedreht auf einer flachen Oberfläche. Drücke die gerillte Seite der Entriegelunsvorrichtung nach unten und greife den herrausragenden Teil, um ihn nach oben ziehen zu können, bis er vertikal nach oben zeigt.
    • Platziere das Gerät umgedreht auf einer flachen Oberfläche.

    • Drücke die gerillte Seite der Entriegelunsvorrichtung nach unten und greife den herrausragenden Teil, um ihn nach oben ziehen zu können, bis er vertikal nach oben zeigt.

    The A1286 has no Access Door.!!

    I actually can see no sign of the battery!...

    aguib - Antwort

    Zitat von aguib:

    The A1286 has no Access Door.!!

    I actually can see no sign of the battery!...

    I assume you have the newer model, with the built-in battery. It's still removable with tools, but these are the wrong instructions for that model.

    lgc90 - Antwort

    when will there be a guide for the other unibody macbook pro. that does not have an access door?

    irishking - Antwort

    Is there a manual to show, how disasembly the display, i mean, after step 5, to check the display between lcd and aluminiun back case?

    Max

    Max - Antwort

    On other guides you state the height of the HD that can be supported, e.g. MacBook Pro 15" Core 2 Duo Model A1211 Festplatte tauschen , I have read ( but have not confirmed ) that the uni-body MacBook Pro can be fitted with the 750GB and 1TB 12mm drive from Western Digital.

    Can you confirm this?

    Many thanks in advance.

    ahothabeth - Antwort

    Zitat von SHerwood Ball:

    My display and aluminum casing has separated.

    I don't know if it just snaps back together or does it need to be glued.

    I dropped mine on the carpeted stairs and the display still works.

    I'm hoping I can just snap it back together and that no plastic pieces or teeth of the snapping

    portion have been broken........

    SHerwood Ball - Antwort

    When you say "left fan" is this "left when looking at the logic board after turning the computer over and looking it up opening it up" or "left when sitting at the computer keyboard and typing on it"?

    thvv - Antwort

    We always use left and right in reference to the computer when you're using it.

    Andrew Optimus Goldheart -

    Directions were great and the worn dc in board was replaced. The hardest part of the procedure is disconnecting the data display cable. A better description of step 21 is to slide the connector parallel to the circuit board towards the outside corner. Reconnecting correctly took several tries.

    I used the tip of the spudger to nudge the corners a little at a time to seat the connector.

    The ribbon connector for the keyboard has to be inserted all the way before seating the retaining cap. It took me three tries . First try power button did not work second try numbers keys did not work.

    Thanks for the directions ...could not have done it with out them!!!

    landryd - Antwort

    Hola. Poseo un MacBook Pro Late 2008 y debo cambiarle las cornetas. Me sirve unas cornetas de un MBP Late 2011?

    jegonzalez80 - Antwort

  2. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Jetzt kaufen

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Jetzt kaufen
  3. Die Klappe sollte sich etwas erhoben haben und du kannst sie entnehmen.
    • Die Klappe sollte sich etwas erhoben haben und du kannst sie entnehmen.

  4. Achte darauf, dass der Riegel an der Akkuklappe senkrecht steht, bevor du fortfährst.
    • Achte darauf, dass der Riegel an der Akkuklappe senkrecht steht, bevor du fortfährst.

    • Fasse die durchsichtige Kunstofflasche an, ziehe den Akku hoch und aus dem Unibody heraus.

    • Wenn die Lasche eingedrückt ist, dann verriegelt sie den Akku.

    Do I need to wait for the battery to charge completely before using the computer (while plugged in)?

    Kaila Potts - Antwort

    No. You do not need to charge it completely before removing it.

    Titus (#1579) - Antwort

Abschluss

Um dein Gerät wieder zusammenbauen, folge den Schritten in umgekehrter Reihenfolge.

78 weitere Nutzer haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:

100%

Diese Übersetzer helfen uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Beginne zu übersetzen ›

I recently replaced my battery for the macbook pro late 2008 model number A1281, I have a weared problem with that - System shuts down while connected to power when it is Turned On.

I tried NVRAM reset also but no luck, Any help on this would be appreciable.

Thanks

Kamalarajan

Kamalarajan - Antwort

Have just received the A1281 replacement battery. However it does not charge. The magsafe light is on green but the battery is not charging. When I put in my old battery the magsafe goes to amber and it starts to charge. Any ideas?

domburton - Antwort

I just bought a new battery to replace A1281, and I have the same issue as you : the battery is not charging, power charger light is green.

I've tried to reset SMC, but it didn't solve anything.

Rodac -

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 4

Letzte 7 Tage: 38

Letzte 30 Tage: 164

Insgesamt: 74,308