Zum Hauptinhalt wechseln

MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen

Was du brauchst

  1. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen, Schutzklappe (Akku und Festplatte): Schritt 1, Bild 1 von 2 MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen, Schutzklappe (Akku und Festplatte): Schritt 1, Bild 2 von 2
    • Klappe das Display zu und platziere deinen Laptop umgedreht auf einer flachen Oberfläche.

    • Drücke die gerillte Seite der Entriegelunsvorrichtung nach unten und greife den herrausragenden Teil, um ihn nach oben ziehen zu können, bis er vertikal nach oben zeigt.

    The A1286 has no Access Door.!!

    I actually can see no sign of the battery!...

    aguib - Antwort

    Zitat von aguib:

    The A1286 has no Access Door.!!

    I actually can see no sign of the battery!...

    I assume you have the newer model, with the built-in battery. It's still removable with tools, but these are the wrong instructions for that model.

    lgc90 - Antwort

    when will there be a guide for the other unibody macbook pro. that does not have an access door?

    irishking - Antwort

    Is there a manual to show, how disasembly the display, i mean, after step 5, to check the display between lcd and aluminiun back case?

    Max

    Max - Antwort

    On other guides you state the height of the HD that can be supported, e.g. MacBook Pro 15" Core 2 Duo Model A1211 Festplatte tauschen , I have read ( but have not confirmed ) that the uni-body MacBook Pro can be fitted with the 750GB and 1TB 12mm drive from Western Digital.

    Can you confirm this?

    Many thanks in advance.

    ahothabeth - Antwort

    Zitat von SHerwood Ball:

    My display and aluminum casing has separated.

    I don't know if it just snaps back together or does it need to be glued.

    I dropped mine on the carpeted stairs and the display still works.

    I'm hoping I can just snap it back together and that no plastic pieces or teeth of the snapping

    portion have been broken........

    SHerwood Ball - Antwort

    When you say "left fan" is this "left when looking at the logic board after turning the computer over and looking it up opening it up" or "left when sitting at the computer keyboard and typing on it"?

    thvv - Antwort

    We always use left and right in reference to the computer when you're using it.

    Andrew Optimus Goldheart -

    Directions were great and the worn dc in board was replaced. The hardest part of the procedure is disconnecting the data display cable. A better description of step 21 is to slide the connector parallel to the circuit board towards the outside corner. Reconnecting correctly took several tries.

    I used the tip of the spudger to nudge the corners a little at a time to seat the connector.

    The ribbon connector for the keyboard has to be inserted all the way before seating the retaining cap. It took me three tries . First try power button did not work second try numbers keys did not work.

    Thanks for the directions ...could not have done it with out them!!!

    landryd - Antwort

    Hola. Poseo un MacBook Pro Late 2008 y debo cambiarle las cornetas. Me sirve unas cornetas de un MBP Late 2011?

    jegonzalez80 - Antwort

    Please read the instructions about removing the bluetooth cable - you CAN work around it, and NOT take off the plug.

    kenneth krabat - Antwort

  2. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen: Schritt 2, Bild 1 von 1
    • Die Klappe sollte sich etwas erhoben haben und du kannst sie entnehmen.

  3. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen, Akku: Schritt 3, Bild 1 von 1
    • Achte darauf, dass der Riegel an der Akkuklappe senkrecht steht, bevor du fortfährst.

    • Fasse die durchsichtige Kunstofflasche an, ziehe den Akku hoch und aus dem Unibody heraus.

    • Wenn die Lasche eingedrückt ist, dann verriegelt sie den Akku.

    Do I need to wait for the battery to charge completely before using the computer (while plugged in)?

    Kaila Potts - Antwort

    No. You do not need to charge it completely before removing it.

    Titus (#1579) - Antwort

  4. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen, Gehäuseunterteil: Schritt 4, Bild 1 von 1
    • Entferne die folgenden acht Kreuzschlitzschrauben, mit denen das untere Gehäuseunterteil befestigt ist:

    • Eine 5,4 mm Kreuzschlitzschraube

    • Drei 14 mm Kreuzschlitzschrauben

    • Vier 3,5 mm Kreuzschlitzschrauben

    Hi, My name is Jess I need help asap I accidentally dropped my macbook Pro and i cant find the silver screw for the top left back side, Does any one know if I can replace it with an eye glass screw?? If you can help at all Please e-mail me at Chambliss_jess@yahoo.com thx please help me my bf is going off... ;(

    Jess - Antwort

    The fixit PH00 is the wrong screw driver for this entire job. It did not fit in the screws, it was too pointy and caused screws to be rounded off.

    mattrittgers - Antwort

  5. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen: Schritt 5, Bild 1 von 1
    • Hebe mit beiden Händen das Gehäuseunterteil vom oberen Gehäuse an und entferne es.

    About midway along each edge is a snap. To release each snap, gently slide the flat edge of a Spudger under the lower case, then lift the lower case away.

    jonathansturges - Antwort

  6. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen, Rechter Lüfter: Schritt 6, Bild 1 von 2 MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen, Rechter Lüfter: Schritt 6, Bild 2 von 2
    • Hebele den Stecker des Lüfters mit dem Spudger gerade aus dem Anschluss auf dem Logic Board.

    • Achte darauf, dass du nur den Stecker selbst hochhebelst und nicht den Anschluss, du könntest sonst das Gerät beschädigen.

    • Es geht am Besten, wenn du den Spudger unter die Lüfterkabel setzt und dann um die Achse drehst.

    Did it the way described. Maybe because of the age of the Mac/circuit board but the sockets came out with the connector. Only solution now for this fan to work would be to hard solder. Not a happy outcome.

    Nicole Bokat - Antwort

  7. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen: Schritt 7, Bild 1 von 1
    • Entferne die drei Kreuzschlitzschrauben, mit denen der rechte Lüfter am Logic Board und am oberen Gehäuse befestigt ist:

    • Zwei 3,2 mm Schrauben

    • Eine 3,5 mm Schrauben

    I ruined the head of the heads of the 3.2 mm and the 3.5 Phillips screws. What kind of screws are this (M1, M1.2, ...?)? I need a replacement.

    PS I used the appropriate screw driver (Wiha PH00).

    Michael Domhardt - Antwort

    Hi! how did you fix it? I ruined the last two red 3,2 mm screws as well, so the old fan is still in there....

    laurabaas94 -

    I can't seem to get the two (2) 3.2 screws out, they are in way too tight. I'm afraid of rounding out the slots and putting too much pressure on the board. No issues with replacing the other fan..any hints/tricks to getting these screws out? thanks

    Joseph Vossen - Antwort

    Same problem here, killed the head of the top left 3.2 mm screw … any ideas how to get it out now?

    Max Bobzien - Antwort

    I have been reading this so many times …

    “”killed the head screws “”

    May I suggest , open your laptop at L shape

    Upside down keyboard on your desk but your screen vertical out the way !

    And doing a little more pressure with out rush very gently breaking loctite paint ….

    Good luck guys 🤙🏻

    analfabetagoloso - Antwort

  8. MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) rechten Lüfter austauschen: Schritt 8, Bild 1 von 1
    • Entferne den Lüfter vom oberen Gehäuse.

Abschluss

Um dein Gerät wieder zusammenbauen, folge den Schritten in umgekehrter Reihenfolge.

71 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Ein Kommentar

A great walkthrough.

Once completed, I did a reset of the PRAM, and it all worked beautifully.

Thanks again.

Shai Yammanee - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 14

Insgesamt: 41,161