Einleitung

Diese Anleitung wird dir zeigen, wie du die Schutzklappe deines MacBooks entfernen kannst.

Platziere das Gerät umgedreht auf einer flachen Oberfläche.
  • Platziere das Gerät umgedreht auf einer flachen Oberfläche.

  • Drücke die gerillte Seite der Entriegelunsvorrichtung nach unten und greife den herrausragenden Teil, um ihn nach oben ziehen zu können, bis er vertikal nach oben zeigt.

The A1286 has no Access Door.!!

I actually can see no sign of the battery!...

aguib - Antwort

Quote from aguib:

The A1286 has no Access Door.!!

I actually can see no sign of the battery!...

I assume you have the newer model, with the built-in battery. It's still removable with tools, but these are the wrong instructions for that model.

lgc90 - Antwort

when will there be a guide for the other unibody macbook pro. that does not have an access door?

irishking - Antwort

Is there a manual to show, how disasembly the display, i mean, after step 5, to check the display between lcd and aluminiun back case?

Max

Max - Antwort

On other guides you state the height of the HD that can be supported, e.g. MacBook Pro 15" Core 2 Duo Model A1211 Hard Drive Replacement , I have read ( but have not confirmed ) that the uni-body MacBook Pro can be fitted with the 750GB and 1TB 12mm drive from Western Digital.

Can you confirm this?

Many thanks in advance.

ahothabeth - Antwort

Quote from SHerwood Ball:

My display and aluminum casing has separated.

I don't know if it just snaps back together or does it need to be glued.

I dropped mine on the carpeted stairs and the display still works.

I'm hoping I can just snap it back together and that no plastic pieces or teeth of the snapping

portion have been broken........

SHerwood Ball - Antwort

When you say "left fan" is this "left when looking at the logic board after turning the computer over and looking it up opening it up" or "left when sitting at the computer keyboard and typing on it"?

thvv - Antwort

We always use left and right in reference to the computer when you're using it.

Andrew Optimus Goldberg -

Directions were great and the worn dc in board was replaced. The hardest part of the procedure is disconnecting the data display cable. A better description of step 21 is to slide the connector parallel to the circuit board towards the outside corner. Reconnecting correctly took several tries.

I used the tip of the spudger to nudge the corners a little at a time to seat the connector.

The ribbon connector for the keyboard has to be inserted all the way before seating the retaining cap. It took me three tries . First try power button did not work second try numbers keys did not work.

Thanks for the directions ...could not have done it with out them!!!

landryd - Antwort

Hola. Poseo un MacBook Pro Late 2008 y debo cambiarle las cornetas. Me sirve unas cornetas de un MBP Late 2011?

jegonzalez80 - Antwort

Die Klappe sollte sich etwas erhoben haben und du kannst sie entnehmen.
  • Die Klappe sollte sich etwas erhoben haben und du kannst sie entnehmen.

Kommentar hinzufügen

Abschluss

Um das Gerät zusammenzubauen, folge der Anleitung in umgekehrter Reihenfolge.

39 weitere Nutzer haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:

100%

Luis Herdt hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Beginne zu übersetzen ›

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 12

Letzte 30 Tage: 66

Insgesamt: 28,717