Repariere deine Sachen Community Store

MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Einleitung

Hard drive jam packed with files? Replacing your hard drive is easy.

Was du brauchst

  1. MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement, Access Door: Schritt 1, Bild 1 von 2 MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement, Access Door: Schritt 1, Bild 2 von 2

    • With the case closed, place the Unibody top-side down on a flat surface.

    • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

    Übersetzen

  2. MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement: Schritt 2, Bild 1 von 1

    • The access door should now be raised enough to lift it up and out of the Unibody.

    Übersetzen

  4. MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement, Battery: Schritt 3, Bild 1 von 1

    • Be sure the access door release latch is vertical before proceeding.

    • Grab the translucent plastic tab and pull the battery up and out of the Unibody.

    • If the latch is depressed it will lock the battery in place.

    Übersetzen

  5. MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement, Hard Drive: Schritt 4, Bild 1 von 1

    • Remove the single Phillips screw securing the hard drive bracket to the upper case.

    • This screw is captive to the hard drive bracket.

    Übersetzen

  6. MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement: Schritt 5, Bild 1 von 1

    • Lift the hard drive by its pull tab enough to grab and remove the retaining bracket.

    • Lift the hard drive out of the upper case, minding the cable attaching it to the computer.

    Übersetzen

  7. MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement: Schritt 6, Bild 1 von 1

    • Remove the hard drive from its cable by pulling the cable connector straight away from the drive.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 807