Zum Hauptinhalt wechseln

MacBook Unibody Model A1342 Lower Case Replacement

Was du brauchst

  1. MacBook Unibody Model A1342 Lower Case Replacement, Lower Case: Schritt 1, Bild 1 von 1
    • Remove the eight 4 mm Phillips screws securing the lower case to the MacBook.

  2. MacBook Unibody Model A1342 Lower Case Replacement: Schritt 2, Bild 1 von 3 MacBook Unibody Model A1342 Lower Case Replacement: Schritt 2, Bild 2 von 3 MacBook Unibody Model A1342 Lower Case Replacement: Schritt 2, Bild 3 von 3
    • The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.

    • Slightly lift the lower case near the vent opening.

    • Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.

    • The location of these three clips is shown in the third picture.

Abschluss

To reassemble your device, follow these instructions in reverse order.

74 weitere Nutzer:innen haben diese Anleitung absolviert.

2 Kommentare

Apple has a recall on this part, so you can get a replacement for an improved version free and save yourself $149.99. Check out http://www.apple.com/support/macbook-bot...

Shane - Antwort

Would the Macbook Pro back cover also fit this?

wow - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 12

Letzte 30 Tage: 57

Insgesamt: 69,665