Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

This guide will walk you through the steps of replacing the screen of your Macbook Pro.

  1. Set up a clean workspace and gather all supplies. You will need your Macbook Pro, a new screen, a hair dryer, a screen cleaning cloth, and a suction cup.
    • Set up a clean workspace and gather all supplies. You will need your Macbook Pro, a new screen, a hair dryer, a screen cleaning cloth, and a suction cup.

  2. Use a hair dryer to heat the adhesive around the edges of the screen you are removing. Use a hair dryer to heat the adhesive around the edges of the screen you are removing.
    • Use a hair dryer to heat the adhesive around the edges of the screen you are removing.

    It would be very helpful if someone gave us a hint as to how hot to get the glass before the adhesive releases fairly easily. I didn't get it quite hot enough, I think, as it was a bear to get it started to release. My glass was pretty badly smashed around the iSight camera, and that part was a b*tch to get off. I was worried about damaging the LCD or some other component in the lid by getting it too hot.

    Can anyone give us some further tips on this point?

    jiclark - Antwort

    I agree with jiclark. How hot should you get this? This instruction set is poorly written. I heated mine up beyond being able to touch the housing and the adhesive would not release. It melted the rubber surround though… THANKS ifitit.com You just BROKE IT!

    Nunov Urbiznes - Antwort

    You have to read the tutorial before doing it. If it doesn't fit with your problem, you are the only person responsible.

    Kevin Bonvin -

    Nunov is correct, this tutorial makes this repair look a lot simpler than it really is. A hair dryer is not the correct tool, as Nunov stated, it will melt the rubber before the glue releases the screen. Check out this video to see how difficult this repair can actually be. You’ll have to ignore the language and the bird (really annoying). https://www.youtube.com/watch?v=_cbvZ2id...

    Ransom Valley - Antwort

    I just melted the rubber inside the Mac Screen And broke my LCD. My glass, ironically, is still very intact.

    I cannot in good faith recommend that anyone try the steps.

    I feel like this guide was written so that they could say that they've made a guide.

    Kevin McCartney - Antwort

  3. Attach the suction cup found in the iFixit repair kit to the corner of your screen, by gently pressing down until it seals. Lift screen away by pulling up on the suction cup key ring. Attach the suction cup found in the iFixit repair kit to the corner of your screen, by gently pressing down until it seals. Lift screen away by pulling up on the suction cup key ring. Attach the suction cup found in the iFixit repair kit to the corner of your screen, by gently pressing down until it seals. Lift screen away by pulling up on the suction cup key ring.
    • Attach the suction cup found in the iFixit repair kit to the corner of your screen, by gently pressing down until it seals. Lift screen away by pulling up on the suction cup key ring.

    Another GARBAGE step. If you are having to replace a broken screen how on earth will a suction cup work. The screen is cracked so it can’t make suction. Way to go ifixit.com replacing a good screen with another good screen to show how to do something. You are a joke!

    Nunov Urbiznes - Antwort

    Omg, changing a glass is not that easy. This tutorial is mage by a member of the community, it's not an official iFixit one. So please, be smart and read more about your problem next time.

    MacBook Pro (13 Zoll, Mitte 2010, Unibody) Displayglas tauschen

    Kevin Bonvin -

    The only way I was able to get through this step was to take a syringe And inject acetone In between been the now obliterated rubber gasket.

    I cannot in good faith recommend that anyone try the steps.

    I feel like this guide was written so that they could say that they've made a guide.

    Kevin McCartney - Antwort

  4. Use a screen cleaning cloth to buff out any marks on your Macbook Pros screen surface. Use a screen cleaning cloth to buff out any marks on the inside of new glass that will be applied.
    • Use a screen cleaning cloth to buff out any marks on your Macbook Pros screen surface.

    • Use a screen cleaning cloth to buff out any marks on the inside of new glass that will be applied.

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Remove the strips covering the adhesive on the new screen. Heat the new adhesive strips evenly using the hair dryer.
    • Remove the strips covering the adhesive on the new screen.

    • Heat the new adhesive strips evenly using the hair dryer.

  7. Place the new screen in position. Confirm that the new screen is properly aligned with the edges of the Macbook Pro. Place the new screen in position. Confirm that the new screen is properly aligned with the edges of the Macbook Pro.
    • Place the new screen in position. Confirm that the new screen is properly aligned with the edges of the Macbook Pro.

  8. Using the screen cleaning cloth carefully press the edges of the screen to seal the adhesive. Using the screen cleaning cloth carefully press the edges of the screen to seal the adhesive.
    • Using the screen cleaning cloth carefully press the edges of the screen to seal the adhesive.

  9. Peel the protective covering off the new screen.
    • Peel the protective covering off the new screen.

  10. To insure the seal of the adhesive, reheat it again with the hair drying. To insure the seal of the adhesive, reheat it again with the hair drying. To insure the seal of the adhesive, reheat it again with the hair drying.
    • To insure the seal of the adhesive, reheat it again with the hair drying.

  11. Finally, use the screen cleaning cloth and carefully press the edges of the screen one more time.
    • Finally, use the screen cleaning cloth and carefully press the edges of the screen one more time.

  12. Enjoy your laptop with it's brand new screen!
    • Enjoy your laptop with it's brand new screen!

Abschluss

This guide provides all instructions necessary to dismantle and replace a Macbook Pro Screen.

25 weitere Nutzer haben diese Anleitung absolviert.

Akh1913

Mitglied seit: 16.10.2015

837 Reputation

1 Anleitung geschrieben

Team

PIRL Gadget Garage Mitglied von PIRL Gadget Garage

Community

9 Mitglieder

8 Anleitungen geschrieben

How did you know the correct part number for your specific MacBook? Where did you source the glass?

frightanic.com - Antwort

I sourced my glass this eBay seller: http://www.ebay.com/usr/beetstech?_trksi...

To find the correct part, I followed iFixit's "ID your Mac" prompts in the parts store, then selected the glass panel from the list of compatible parts.

Hope this helps!

Noah Smith -

Is it useful for internal crack

tiffanyts - Antwort

FYI, OWC (Other World Computing, aka macsales.com) has the 15-inch glass for $25, and the 13-inch for $24:

https://eshop.macsales.com/item/Apple/MB... (15-inch)

https://eshop.macsales.com/item/Apple/MB... (13-inch)

…and I just discovered they even have the 17-inch:

https://eshop.macsales.com/item/Apple/MB...

One last comment: get the glass as hot as you can!

jiclark - Antwort

Does this work for the Late-2013 Retina MacBook Pro (15-inch)?

Brian Shiau - Antwort

There’s a rubber seal, or bumper around the outside of the glass, does the new screen get pressed under that rubber or does it just sort of fit within it? Anyone have unexpected difficulties with this?

johnocarney - Antwort

looks like it stays behind if you check the close-ups on step 6

Adam Tolley -

hello where can i find a new Screen Glass for my MacBook Pro Retina 15-inch Mid 2014 ?? can anyone help me please ??

sebastian.buchheit - Antwort

you can find it for about 15 bucks on amazon

David bellows -

Just to confirm, replacing the glass will fix the issue with the delaminated screen that is a known issue for this model of macbook pro

David Emerson - Antwort

Does this work for mid-2010 13” MBP unibody?

Edward Meyer - Antwort

Whatever you do, check the camera wiring is safe inside it’s groove. I just broke a glass because the wire wasn’t inside the groove when I pressed down. I’m a dumbass!

Dave Watkin - Antwort

Just replaced glass on a 15” unibody mid-2012 MBP. Great tutorial! Shattered glass (like mine was) seemed much trickier to remove (can’t get a good suction on cracked glass, and it keeps cracking during removal). Also, it would have been helpful to know about how long to use the hair dryer for those steps.

Paul Keew - Antwort

Before proceeding, readers really need to check the comments, and also get a 2nd opinion - such as from YouTube videos of other users, and the actualy article created by iFixit Staff Writers: MacBook Pro (13 Zoll, Mitte 2009, Unibody) Displayglas tauschen

The title of this article is unfortunately vague enough so that it attracts a lot of views from search engine results - even though it only applies just to the MacBook Pro 13-inch Unibody A1286 model - and not other models like the MacBook Pro Retina or (shudder) Touchbar. The actual iFixit staff-written guide is also limited to show under the replacement guides of the 2009 & 2010 variants of the A1286 MacBook Pro 13-inch Unibody even though the screen and front glass are constructed the same as each other for the subsequent years (2011 - 2012). Finally - this process is actually tricky enough to challenge experienced glaziers & repairers - so it needs a panel of writers & technicians to collaborate with a proper guide.

Jon T. - Antwort

WARNING: Do not melt your function keys with the hair dryer… Yup, you’re welcome.

Simon Holmes - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 40

Letzten 7 Tage: 283

Letzten 30 Tage: 1,551

Insgesamt: 69,444