Zum Hauptinhalt wechseln

Einleitung

This guide will walk through the steps of replacing the internal battery of a Magellan RoadMate 2120T-LM. This guide is also a prerequisite for replacing every other component of the device.

  1. Turn the GPS over on its backside and remove the  six 3 mm Phillips #1 screws. Turn the GPS over on its backside and remove the  six 3 mm Phillips #1 screws. Turn the GPS over on its backside and remove the  six 3 mm Phillips #1 screws.
    • Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.

  2. Pry up on back panel with black spudger Pry up on back panel with black spudger
    • Pry up on back panel with black spudger

  3. Disconnect battery and speaker cables from the motherboard at indicated places.
    • Disconnect battery and speaker cables from the motherboard at indicated places.

  4. Use a spudger to remove the battery from the back panel.
    • Use a spudger to remove the battery from the back panel.

    • If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.

    • There is a strong adhesive holding the battery to the back panel.

    • This step is not a prerequisite for replacement of other components.

Abschluss

To reassemble your device, follow these instructions in reverse order.

John Doe

Mitglied seit: 12.01.2016

503 Reputation

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 183