Zum Hauptinhalt wechseln

Einleitung

This guide will walk through the steps of replacing the internal battery for a Magellan RoadMate 2120T-LM. Before starting, ensure that the new battery is supported by the device.

  1. Turn the GPS over on its backside and remove the  six 3 mm Phillips #1 screws. Turn the GPS over on its backside and remove the  six 3 mm Phillips #1 screws. Turn the GPS over on its backside and remove the  six 3 mm Phillips #1 screws.
    • Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.

  2. Pry up on back panel with black spudger Pry up on back panel with black spudger
    • Pry up on back panel with black spudger

  3. Disconnect battery and speaker cables from the motherboard at indicated places.
    • Disconnect battery and speaker cables from the motherboard at indicated places.

  4. Use a spudger to remove the battery from the back panel.
    • Use a spudger to remove the battery from the back panel.

    • If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.

    • There is a strong adhesive holding the battery to the back panel.

    • This step is not a prerequisite for replacement of other components.

  5. Remove the four 3 mm Phillips #1 screws from the motherboard.
    • Remove the four 3 mm Phillips #1 screws from the motherboard.

    • In the picture three out of four screws have already been removed.

  6. Remove black tape covering connection ribbon for touch-screen Remove black tape covering connection ribbon for touch-screen
    • Remove black tape covering connection ribbon for touch-screen

  7. Pull up on the brown tab holding down the ribbon. In this picture the brown tab has already been lifted. Lift up on the motherboard and remove it from device.
    • Pull up on the brown tab holding down the ribbon.

    • In this picture the brown tab has already been lifted.

    • Lift up on the motherboard and remove it from device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

John Doe

Mitglied seit: 12.01.2016

503 Reputation

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 133