Repariere deine Sachen Community Store

Magic Bullet MB1001B Power Cord Replacement

Einleitung

Having trouble turning on your Magic Bullet? This guide will help you replace the power cord.

Was du brauchst

  1. Magic Bullet MB1001B Power Cord Replacement, Power Cord: Schritt 1, Bild 1 von 1

    • Remove the four rubber pegs from the feet on the base of the Magic Bullet using the spudger.

    Bearbeiten

  2. Magic Bullet MB1001B Power Cord Replacement: Schritt 2, Bild 1 von 1

    • Remove the four 14.0 mm Phillips head screws in the feet of the base of the Magic Bullet using the Phillips #1 screwdriver.

    Bearbeiten

  3. Magic Bullet MB1001B Power Cord Replacement: Schritt 3, Bild 1 von 1

    • Remove the black base plate.

    Bearbeiten

  5. Magic Bullet MB1001B Power Cord Replacement: Schritt 4, Bild 1 von 1

    • Remove the two 13.0 mm Phillips head screws from the white plastic cable guide using a Phillips #1 screwdriver.

    Bearbeiten

  6. Magic Bullet MB1001B Power Cord Replacement: Schritt 5, Bild 1 von 1

    • Remove the white plastic cable guide.

    Bearbeiten

  7. Magic Bullet MB1001B Power Cord Replacement: Schritt 6, Bild 1 von 1

    • Remove the two crimp caps from the end of the wires.

    • You will need to purchase new crimp caps and use pliers to crimp the new crimp caps on the connected wires during reassembly.

    Bearbeiten

  8. Magic Bullet MB1001B Power Cord Replacement: Schritt 7, Bild 1 von 1

    • Separate the black wires of the power cord from the red wires on the Magic Bullet base.

    • Be sure to mark which wires are connected before separating them to ensure that they are properly reconnected during reassembly.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 5 anderen Mitwirkenden

Bridget Carr

Mitglied seit: 10/06/15

266 Reputation

1 Anleitung geschrieben

Auszeichnungen: 12

+ 9 weitere Auszeichnungen

Team

Cal Poly, Team 12-13, Maness Fall 2015 Mitglied von Cal Poly, Team 12-13, Maness Fall 2015

CPSU-MANESS-F15S12G13

4 Mitglieder

8 Anleitungen geschrieben

2 Kommentare

I accidentally burnt through my power cord. What type of power cord do I need to replace it?

virginia.cooke - Antwort

Where do we get a new power cord, and if that does not work, what do we do next?

davidcohnkettlebells - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 18

Insgesamt: 2,359