Zum Hauptinhalt wechseln

Einleitung

Warning: Battery replacement can be dangerous! Exercise extreme caution when following this guide.

    • Wedge spudgers and picks between the acrylic and the metal.

    • Once separated, you will be into the inner workings of the device.

  1. It can be difficult to connect the top of the mouse to the board due to amount of space between the top and the board.
    • It can be difficult to connect the top of the mouse to the board due to amount of space between the top and the board.

    • Be careful with the ribbon cable!

  2. The battery is held in only by a lot of glue under the battery.
    • The battery is held in only by a lot of glue under the battery.

    • Get a spudger under the battery and pry it up off the glue.

    • Pull the charging port out of place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

3 weitere Nutzer haben diese Anleitung absolviert.

BeanMan56

Mitglied seit: 09.06.2021

1.492 Reputation

13 Anleitungen geschrieben

Team

Restart Project Mitglied von Restart Project

Community

14 Mitglieder

247 Anleitungen geschrieben

Ein Kommentar

I may be wrong because I don’t own this device, but from what I’ve read from other tutorials, it does not look like it’s necessary to do steps 1 and 2. The tutorials I’ve read just split the mouse in 2 without messing with the bottom of the mouse. Doing so means they don’t need to worry about damaging the bottom or working with the adhesive.

ComputerWhiz - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 24

Letzten 7 Tage: 220

Letzten 30 Tage: 970

Insgesamt: 4,293