Zum Hauptinhalt wechseln

Einleitung

This guide shows how to remove the chain brake cover for a Makita chainsaw.

Werkzeuge

Ersatzteile

  1. Use a 13 mm socket to remove the two nuts securing the sprocket guard plate.
    • Use a 13 mm socket to remove the two nuts securing the sprocket guard plate.

  2. Remove the sprocket guard plate.
    • Remove the sprocket guard plate.

  3. If the chainsaw has a chain and guide bar installed, follow the manufacturer's instructions and remove them before proceeding.
    • If the chainsaw has a chain and guide bar installed, follow the manufacturer's instructions and remove them before proceeding.

    • During reassembly, if you are reinstalling the chain and guide bar, follow the manufacturers instructions on proper chain tensioning techniques.

  4. Remove the four 12 mm long T27 screws securing the chain brake cover.
    • Remove the four 12 mm long T27 screws securing the chain brake cover.

  5. Remove the chain brake cover.
    • Remove the chain brake cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Mitglied seit: 03.01.2018

173.326 Reputation

428 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

140 Mitglieder

17.046 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 2

Insgesamt: 328