Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide shows how to remove the chain brake cover for a Makita chainsaw.
Was du brauchst
-
-
Use a 13 mm socket to remove the two nuts securing the sprocket guard plate.
-
-
-
-
If the chainsaw has a chain and guide bar installed, follow the manufacturer's instructions and remove them before proceeding.
-
-
-
Remove the four 12 mm long T27 screws securing the chain brake cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.