Repariere deine Sachen Community Store

MerchSource the Black Series Boat Racer Gaskets Replacement

Einleitung

This repair guide will show you how to replace the gaskets in the MerchSource the Black Series Boat Racers toy boat. The gaskets are foam pieces that secure the battery compartment in the boat from water leakage.

Was du brauchst

  1. MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: Schritt 1, Bild 1 von 2 MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: Schritt 1, Bild 2 von 2

    • Remove the screw on the top of the boat at the rear end using a Phillips #2 screwdriver.

    • Screw length is 16 mm.

    Bearbeiten

  2. MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 2, Bild 1 von 3 MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 2, Bild 2 von 3 MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 2, Bild 3 von 3

    • Remove the top of the boat by sliding it backwards and then pulling it off.

    Bearbeiten

  4. MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 3, Bild 1 von 2 MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 3, Bild 2 von 2

    • Grab the rubber gasket with tweezers and pull it out of the slot.

    Bearbeiten

  5. MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 4, Bild 1 von 3 MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 4, Bild 2 von 3 MerchSource the Black Series Boat Racer Gaskets Replacement: Schritt 4, Bild 3 von 3

    • Gently remove the gasket and replace with a new one.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 9

Insgesamt: 266