Zum Hauptinhalt wechseln

Microsoft Band Battery Replacement

Was du brauchst

  1. Microsoft Band Battery Replacement, Battery: Schritt 1, Bild 1 von 1
    • Unscrew both side panel 2mm screws using the T3 Torx screwdriver.

  2. Microsoft Band Battery Replacement: Schritt 2, Bild 1 von 1
    • Firmly pry up the side panel using the plastic spudger to break the waterproof seal and lift the battery panel.

  3. Microsoft Band Battery Replacement: Schritt 3, Bild 1 von 1
    • Gently pry up one edge of the battery with the plastic spudger.

  4. Microsoft Band Battery Replacement: Schritt 4, Bild 1 von 1
    • Remove battery from its compartment with your fingers.

Abschluss

To reassemble your device, follow these instructions in reverse order. Replace the vibrator in its original compartment.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 17-34, Amido Winter 2015 Mitglied von Cal Poly, Team 17-34, Amido Winter 2015

CPSU-AMIDO-W15S17G34

4 Mitglieder

6 Anleitungen geschrieben

5 Kommentare

where can i buy the battery?

chirac - Antwort

From what I can tell it's something like this:

http://www.alibaba.com/product-detail/Ho...

which is a 3.7v flat lithium ion polymer 72mAh battery. Min order is 1030 though! You can find similar on AliExpress if you search for that description. The dimensions are listed as 4*14.8*21.5mm so it'll need to be within that, or maybe the OP can confirm the battery size?

Simon -

Will this be dangerous?

Rei zzstu Shiozawa - Antwort

Anyway to upgrade to a higher capacity battery to get better life out of it? With GPS on, it dies in 2 hours and I go on 8 hr hikes.

Chris Green - Antwort

No tak wszystko fajnie ale gdzie te akumulatory zakupić ?

Tomasz Sot - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 11,944