Einleitung
Microsoft Lumia 535
RM-1090 / RM-1091/ RM-1089 / RM-1092
Hier wird gezeigt, wie du das Logic Board ausbauen und austauschen kannst.
Was du brauchst
Einführungsvideo
-
-
Schalte das Smartphone aus.
-
Entferne den Akku und jegliche SIM- oder Speicherkarten.
-
-
-
-
Löse folgende Kabel:
-
Flexkabel zum Touchscreen
-
Flexkabel zum LCD
-
Flexkabel zum Ladeanschluss. Dazu musst du den Schaumstoff und das Klebeband entfernen, die schwarze Sicherungsklappe öffnen und dann das Kabel herausziehen.
-
Koaxialkabel zur Antenne. Lasse dir dabei Zeit. Achte darauf, nur am Metallstecker ziehst und nicht am Kabel, du riskierst sonst, dass sich der Stecker vom Kabel löst.
-
Entferne die beiden Torx T4 Schrauben.
Take care when removing the coax connector. Mine was very tight and I managed to disconnect the coax cable from the connector. Phone is now in the bin :-(
Also, when removing the charging dock board flex cable, the connector has a black lock arm. Remove the foam pad and tape to reveal the lock. Gently ease the lock arm up then ease the flex out.
-
-
-
Beachte die Bilder.
With the camera/logic board removed then don’t forget to remove the other end of the charging dock board flex cable from the charging board. When reassembling I found it awkward to hold the protective black guard over the flex out of the way when sliding the end of the ribbon into the replaced charging dock board: combination of tweezers and fingernail required.
-
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
8 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
4 Kommentare
How can I add additional sensors- the gyroscope & compass chips on this logic board?
microsoft lumia 535 chargeing ic complete
my Microsoft lumia 535 chargeing ic complient main mother board lo problem
My microsoft mobile 1090 is not displaying apps but on backlight
Please what can I do to it?