Einleitung
Microsoft Lumia 535
RM-1090 / RM-1091/ RM-1089 / RM-1092
Hier wird gezeigt, wie du das Smartphone öffnen und ein zerbrochenes Display oder den Touchscreen austauschen kannst.
Achtung: es gibt verschiedene Versionen von Touchscreens:
• CT2S1973FPC-A1-E
• CT2C1607FPC-A1-E
Die Version ist auf das Flexkabel aufgedruckt.
Was du brauchst
Einführungsvideo
-
-
Schalte das Smartphone aus.
-
Entferne den Akku und jegliche SIM- oder Speicherkarten.
-
-
-
Löse folgende Kabel:
-
Flexkabel zum Touchscreen
-
Flexkabel zum LCD
-
Flexkabel zum Ladeanschluss. Dazu musst du den Schaumstoff und das Klebeband entfernen, die schwarze Sicherungsklappe öffnen und dann das Kabel herausziehen.
-
Koaxialkabel zur Antenne. Lasse dir dabei Zeit. Achte darauf, nur am Metallstecker ziehst und nicht am Kabel, du riskierst sonst, dass sich der Stecker vom Kabel löst.
-
Entferne die beiden Torx T4 Schrauben.
Take care when removing the coax connector. Mine was very tight and I managed to disconnect the coax cable from the connector. Phone is now in the bin :-(
Also, when removing the charging dock board flex cable, the connector has a black lock arm. Remove the foam pad and tape to reveal the lock. Gently ease the lock arm up then ease the flex out.
-
-
-
-
Beachte die Bilder.
With the camera/logic board removed then don’t forget to remove the other end of the charging dock board flex cable from the charging board. When reassembling I found it awkward to hold the protective black guard over the flex out of the way when sliding the end of the ribbon into the replaced charging dock board: combination of tweezers and fingernail required.
-
-
-
Entferne das Gummiteil am Displayflexkabel.
-
Beklebe die Glasscheibe mit durchsichtigem Klebeband, damit es nicht splittern kann.
-
Erwärme das Glas mit einem Haartrockner oder einem Heißluftgebläse, um den Kleber aufzuweichen.
-
-
-
Benutze ein scharfes Werkzeug, wie z.B einen Cutter, und beginne unten mit dem Trennen. Wenn der Spalt groß genug ist, dann fahre mit einem Kunststoffwerkzeug fort.
-
-
-
Entferne das Display vorsichtig mit einem Kunststoffwerkzeug.
-
Reinige den Rahmen von alten Klebstoffresten.
-
-
-
Setze den Touchscreen ein und beginne mit dem Zusammenbau.
-
Das war's.
-
.
-
.
-
.
-
Warst du erfolgreich?
Is the phone memory gets deleted after doing it??
-
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
50 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
19 Kommentare
hi
cane you tell me price of out glass of lumia 535 duol sim please ?!
I want to join in your team
Hi,How to know which the versions touch screens my phone is Lumia 535 RM-1089 , please?
You need to open phone, cant tell otherwise.
Is the phone memory gets deleted after replacement??
is display assembly of microsoft lumia 540 can be replaced with display assembly of microsoft lumia 535
Nice write up. It's the surest way of doing it right.
FAIYAZ AHMAD Microsoft 535 skirt top
hi
cane you tell me price of out glass of lumia 535 duol sim please ?!
I just have the glass broken, Display works properly. How can i only replace the glass?
Great guide! It was on point!!