Einleitung
Use this guide to replace the kickstand for your Surface.
Was du brauchst
-
-
Turn the tablet over so the screen is facing down.
-
Pull up on the bottom corners to open the stand.
-
Remove the stand by unscrewing the two 5.08mm T5 Torx screws located on the left and right sides.
-
Gently wiggle the stand until the lever in the middle is free, releasing the stand.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
13 weitere Nutzer:innen haben diese Anleitung absolviert.
12 Kommentare
Does this replacement kickstand come with the screws also?