Zum Hauptinhalt wechseln

Microsoft Surface Pro 2 Motherboard Replacement

Was du brauchst

  1. Microsoft Surface Pro 2 Motherboard Replacement, LCD Display: Schritt 1, Bild 1 von 2 Microsoft Surface Pro 2 Motherboard Replacement, LCD Display: Schritt 1, Bild 2 von 2
    • To avoid electrical shocks, unplug and turn off your Surface Pro 2 before proceeding.

  2. Microsoft Surface Pro 2 Motherboard Replacement: Schritt 2, Bild 1 von 1
    • Avoid any skin or eye contact with the heating pad or heating gun because they may cause bodily harm.

    • Using a heating pad or heating gun, heat the edges of the screen to soften the glue. This area extends roughly one inch from the edge of the device.

    • The glue is under the darker border of the device display.

  3. Microsoft Surface Pro 2 Motherboard Replacement: Schritt 3, Bild 1 von 1
    • Using a plastic opening tool and a suction cup as needed for leverage, gently insert one edge of the opening tool under the corner of the screen.

    • If the tool does not easily slide under the screen, return to heating before proceeding.

    • Slowly work the tool around the entire edge of the screen.

  4. Microsoft Surface Pro 2 Motherboard Replacement: Schritt 4, Bild 1 von 3 Microsoft Surface Pro 2 Motherboard Replacement: Schritt 4, Bild 2 von 3 Microsoft Surface Pro 2 Motherboard Replacement: Schritt 4, Bild 3 von 3
    • Detach the orange cables that connect the screen to the motherboard by pulling on the small tabs. Using the nylon spudger, release these cables.

    • Please note the third small connector in red.

    • Allow the glue to cool before letting it come into contact with any other surface.

  5. Microsoft Surface Pro 2 Motherboard Replacement, Motherboard: Schritt 5, Bild 1 von 3 Microsoft Surface Pro 2 Motherboard Replacement, Motherboard: Schritt 5, Bild 2 von 3 Microsoft Surface Pro 2 Motherboard Replacement, Motherboard: Schritt 5, Bild 3 von 3
    • Make sure that the front-facing camera is completely disconnected, and then remove the plastic bracket.

    • Remove the 22 screws on the bezel.

    • Remove the left and right brackets; the left has 16 screws and the right has 15 screws.

    • The three different torx screws used are T3, T4, and T5.

  6. Microsoft Surface Pro 2 Motherboard Replacement: Schritt 6, Bild 1 von 3 Microsoft Surface Pro 2 Motherboard Replacement: Schritt 6, Bild 2 von 3 Microsoft Surface Pro 2 Motherboard Replacement: Schritt 6, Bild 3 von 3
    • Once the brackets are removed, set them aside.

    • The motherboard itself also has screws.

    • Remove the 25 screws of varying sizes that attach the motherboard to the back plate.

    • View the attached photo of a screw diagram to help keep track of your screws.

  7. Microsoft Surface Pro 2 Motherboard Replacement: Schritt 7, Bild 1 von 3 Microsoft Surface Pro 2 Motherboard Replacement: Schritt 7, Bild 2 von 3 Microsoft Surface Pro 2 Motherboard Replacement: Schritt 7, Bild 3 von 3
    • You have now completely removed the motherboard, and it should look like the pictures shown.

    • Be sure to be cautious with all the connections with the cables on the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

USF Tampa, Team 6-2, Remmell Fall 2016 Mitglied von USF Tampa, Team 6-2, Remmell Fall 2016

USFT-REMMELL-F16S6G2

4 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 8

Letzte 30 Tage: 50

Insgesamt: 6,115