Zum Hauptinhalt wechseln

Microsoft Surface Pro 4 Battery Replacement

Was du brauchst

  1. Microsoft Surface Pro 4 Battery Replacement, Remove the CPU shield: Schritt 1, Bild 1 von 2 Microsoft Surface Pro 4 Battery Replacement, Remove the CPU shield: Schritt 1, Bild 2 von 2
    • Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the heat sink.

    • Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it. Do not remove it yet.

    • Take care not to puncture the battery with the tweezers while working on this shield.

  2. Microsoft Surface Pro 4 Battery Replacement: Schritt 2, Bild 1 von 3 Microsoft Surface Pro 4 Battery Replacement: Schritt 2, Bild 2 von 3 Microsoft Surface Pro 4 Battery Replacement: Schritt 2, Bild 3 von 3
    • Repeat the last step at various locations around the perimeter of the EMI shield covering the heat sink.

    • Remove the CPU shield.

  3. Microsoft Surface Pro 4 Battery Replacement, Unscrew the heat sink: Schritt 3, Bild 1 von 1
    • Use a T3 Torx screwdriver to remove two screws from the heat sink:

    • One 2.4 mm screw along the top of the rectangular plate covering the battery.

    • Make sure you don't lose this bracket, as it might separate from the heatsink.

    • One 2.2 mm screw along the bottom of the rectangular plate covering the battery

  4. Microsoft Surface Pro 4 Battery Replacement: Schritt 4, Bild 1 von 1
    • The heat sink is firmly adhered to the fan.

    • Use a Phillips screwdriver to remove three 2.4 mm screws securing the fan.

    • Use a T5 Torx screwdriver to remove the final 4.4 mm screw securing in the fan cover.

  5. Microsoft Surface Pro 4 Battery Replacement: Schritt 5, Bild 1 von 1
    • Use a T5 Torx screwdriver to remove the heat sink screws surrounding the CPU in the following pattern, one turn at a time, until they're free.

    • Screw 1

    • Screw 2

    • Screw 3

    • Screw 4

    • During reassembly, use the same method to install these screws, tightening one turn at a time until each screw is snug.

  6. Microsoft Surface Pro 4 Battery Replacement, Remove the heatsink: Schritt 6, Bild 1 von 2 Microsoft Surface Pro 4 Battery Replacement, Remove the heatsink: Schritt 6, Bild 2 von 2
    • Use the flat end of a spudger to gently pry the heat sink straight up and off of the CPU.

    • Take care not to dent or crease the heat sink pipes during removal.

  7. Microsoft Surface Pro 4 Battery Replacement: Schritt 7, Bild 1 von 3 Microsoft Surface Pro 4 Battery Replacement: Schritt 7, Bild 2 von 3 Microsoft Surface Pro 4 Battery Replacement: Schritt 7, Bild 3 von 3
    • Insert the pointed end of a spudger into a screw hole in the fan shield and lift up to separate it from the fan.

    • The fan shield is held in place with light adhesive.

    • Take care not to dent or crease the heat sink pipes during removal.

  8. Microsoft Surface Pro 4 Battery Replacement: Schritt 8, Bild 1 von 1
  9. Microsoft Surface Pro 4 Battery Replacement, Battery: Schritt 9, Bild 1 von 1
    • Disconnect black wire from motherboard.

  10. Microsoft Surface Pro 4 Battery Replacement: Schritt 10, Bild 1 von 1
    • Remove the five 1.5 mm Torx T3 screws securing the motherboard.

    • Remove the 2.0 mm Torx T4 screw securing the motherboard.

  11. Microsoft Surface Pro 4 Battery Replacement: Schritt 11, Bild 1 von 1
    • Use plastic opening tool to remove metal casing at the bottom left corner of the motherboard.

  12. Microsoft Surface Pro 4 Battery Replacement: Schritt 12, Bild 1 von 1
    • Remove remaining screw.

    • 2.0 mm Torx T4 screw.

  13. Microsoft Surface Pro 4 Battery Replacement: Schritt 13, Bild 1 von 2 Microsoft Surface Pro 4 Battery Replacement: Schritt 13, Bild 2 von 2
    • The battery is attached to the device by strong adhesive tape. Use a plastic opening tool to pry around the underside of the battery.

    • Peel the battery up and away from the bottom of the device.

    • Do not use metal tools for this step. the battery can leak harmful substances if punctured.

  14. Microsoft Surface Pro 4 Battery Replacement: Schritt 14, Bild 1 von 3 Microsoft Surface Pro 4 Battery Replacement: Schritt 14, Bild 2 von 3 Microsoft Surface Pro 4 Battery Replacement: Schritt 14, Bild 3 von 3
    • In order to prevent a short circuit, insert a piece of cardboard, paper or plastic between the battery connector and motherboard before sliding the battery cable out from under the motherboard.

    • Also be careful to protect the motherboard from shorts while placing the cable for the new battery.

    • Detach the battery from under the motherboard. Remove from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

149 weitere Nutzer:innen haben diese Anleitung absolviert.

StacyAnn Brown

Mitglied seit: 01/15/16

3.916 Reputation

2 Anleitungen geschrieben

Team

Metro State, Team 1-3, Carpenter Spring 2016 Mitglied von Metro State, Team 1-3, Carpenter Spring 2016

MSU-CARPENTER-S16S1G3

2 Mitglieder

12 Anleitungen geschrieben

78 Kommentare

thanks for this, use my surface pro 4 all the time, batteries are a disposable item and really need to be user replaceable

(if a company doesn't have a battery replacement service as good as apple's that is)

Bit of hassle but glad it can be done, zero idea where to get a replacement battery from though )-:

Adrian - Antwort

found ! selling on ebay, look totally genuine too

Adrian - Antwort

excellent presentation. I’d never try it myself. But I came here with what appears to be a battery problem. If you accept it as a bit offtopic: my battery icon reads 100%. when I am connected to my adaptor. When I remove the aadaptor plug, the screen goes to only a faint outline…to faint to read what % the battery is reading at. Any thoughts? I’m in a rural area of South West Thailand. So, v difficult to get to a reliable repair shop. Thanks !

paddy - Antwort

This is probably too late for you now, you’ve probably solved this. But for anyone else experiencing this issue, it COULD be the power options. Windows automatically changes the screen brightness when you unplug, you could’ve accidentally set it right down. Go to Control Panel (Small Icons view) > Power Options. There should be options in there for what to do when removing the power adapter. Sorry I can’t be more specific, I’m on a desktop so it doesn’t have the right options to explain it fully.

dave.robilliard -

Thanks for the tutorial. Managed to break a display cable anyway T_T. Just broke itself… The rest was almost a piece of cake.

Seriously WHY so much shields on the motherboard, its insane… As a Mac Technician for almost two decades never saw such a mess (well except the powerbook 12” maybe).

That being said, I love my Surface !

huexley Yannick - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 121

Letzte 7 Tage: 989

Letzte 30 Tage: 4,608

Insgesamt: 373,289