Zum Hauptinhalt wechseln

Einleitung

If you need to replace the kickstand of your Microsoft Surface Pro 6, this guide will show you how.

The kickstand is the part of the tablet that allows it to be propped up. If it breaks or is damaged, you might want to replace it. It’s possible that your kickstand could become wobbly from overuse or if you drop it. The repair is not a difficult process, and you won’t have to take apart the actual Surface Pro 6. You’ll just have to remove and replace the kickstand itself.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Lift the kickstand to expose the hinge screws. Lift the kickstand to expose the hinge screws. Lift the kickstand to expose the hinge screws.
    • Lift the kickstand to expose the hinge screws.

  2. Remove the four 2.7 mm T3 screws—two on each side of the kickstand. Remove the four 2.7 mm T3 screws—two on each side of the kickstand. Remove the four 2.7 mm T3 screws—two on each side of the kickstand.
    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

  3. Move the kickstand back down to a flat position. The hinges are stiff and you may need to use some force to get it down. The hinges are stiff and you may need to use some force to get it down.
    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

  4. Remove the kickstand from the back cover. There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device. Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.
    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Sarah Westberg

Mitglied seit: 11.03.2019

6.737 Reputation

40 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

136 Mitglieder

15.992 Anleitungen geschrieben

Any way to replace the hinges themself?

Only-Wonder - Antwort

Also trying to find this out.

Bobby Stephenson -

Thank you so much. I use the Surface 6 in portrait mode to read and use the kickstand as a grip/hand rest to prevent wrist strain. This meant the screws came loose constantly and I had to try and tighten them using my fingertip; not ideal. With the newly purchased Manta kit, and this guide, they are properly tightened again for the first time in over a year.

Chris Goodluck - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 9

Letzten 7 Tage: 85

Letzten 30 Tage: 388

Insgesamt: 7,076