Zum Hauptinhalt wechseln

Microsoft Surface Pro 6 Kickstand Replacement

Was du brauchst

  1. Microsoft Surface Pro 6 Kickstand Replacement, Kickstand: Schritt 1, Bild 1 von 3 Microsoft Surface Pro 6 Kickstand Replacement, Kickstand: Schritt 1, Bild 2 von 3 Microsoft Surface Pro 6 Kickstand Replacement, Kickstand: Schritt 1, Bild 3 von 3
    • Lift the kickstand to expose the hinge screws.

  2. Microsoft Surface Pro 6 Kickstand Replacement: Schritt 2, Bild 1 von 3 Microsoft Surface Pro 6 Kickstand Replacement: Schritt 2, Bild 2 von 3 Microsoft Surface Pro 6 Kickstand Replacement: Schritt 2, Bild 3 von 3
    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

  3. Microsoft Surface Pro 6 Kickstand Replacement: Schritt 3, Bild 1 von 3 Microsoft Surface Pro 6 Kickstand Replacement: Schritt 3, Bild 2 von 3 Microsoft Surface Pro 6 Kickstand Replacement: Schritt 3, Bild 3 von 3
    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

  4. Microsoft Surface Pro 6 Kickstand Replacement: Schritt 4, Bild 1 von 3 Microsoft Surface Pro 6 Kickstand Replacement: Schritt 4, Bild 2 von 3 Microsoft Surface Pro 6 Kickstand Replacement: Schritt 4, Bild 3 von 3
    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

Abschluss

To reassemble your device, follow these instructions in reverse order.

7 weitere Nutzer:innen haben diese Anleitung absolviert.

Sarah Westberg

Mitglied seit: 03/11/19

22.717 Reputation

70 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

16.573 Anleitungen geschrieben

7 Kommentare

Any way to replace the hinges themself?

Only-Wonder - Antwort

Also trying to find this out.

Bobby Stephenson -

Thank you so much. I use the Surface 6 in portrait mode to read and use the kickstand as a grip/hand rest to prevent wrist strain. This meant the screws came loose constantly and I had to try and tighten them using my fingertip; not ideal. With the newly purchased Manta kit, and this guide, they are properly tightened again for the first time in over a year.

Chris Goodluck - Antwort

If you find that that the kickstand screws are still coming loose, I suggest applying a dab of blue Loctite (or nail polish if in a pinch) to the screws to help them hold in place.

Arthur Shi -

The hinge mechanism has come completely loose so that the stand will not glide back into position. I thought it was the adhesive pads keeping it in place. Reading the instructions above, I now see that these pads can be put back into position. There is a whole Youtube showing the headaches of this kickstand hinge situation. The best bet is to buy a cover with a kickstand attached.

zsugahill - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 6

Letzte 7 Tage: 53

Letzte 30 Tage: 218

Insgesamt: 20,888