Repariere deine Sachen Community Store

Microsoft Surface Pro 7 Screen Replacement

Was du brauchst

  1. Microsoft Surface Pro 7 Screen Replacement, Screen: Schritt 1, Bild 1 von 1

    • Cracked Screen Surface Pro 7

    Übersetzen

  2. Microsoft Surface Pro 7 Screen Replacement: Schritt 2, Bild 1 von 3 Microsoft Surface Pro 7 Screen Replacement: Schritt 2, Bild 2 von 3 Microsoft Surface Pro 7 Screen Replacement: Schritt 2, Bild 3 von 3

    • Apply lots of heat to get screen off!

    • Pry with splicer and suction cup to get plastic guitar pick in.

    Übersetzen

  4. Microsoft Surface Pro 7 Screen Replacement: Schritt 3, Bild 1 von 3 Microsoft Surface Pro 7 Screen Replacement: Schritt 3, Bild 2 von 3 Microsoft Surface Pro 7 Screen Replacement: Schritt 3, Bild 3 von 3

    • Open screen form the top down++

    • We need to disconnect the battery

    • When screen is tilted upwards its easier to get to the battery before disconnecting the display cables

    • Remove battery connect by pushing on the edges

    • Wiggle each edge of the plastic cable cover to get it out with out. Make sure you don't force it out.

    Übersetzen

  5. Microsoft Surface Pro 7 Screen Replacement: Schritt 4, Bild 1 von 1

    • Display Connections

    • Battery Connections

    Übersetzen

  6. Microsoft Surface Pro 7 Screen Replacement: Schritt 5, Bild 1 von 3 Microsoft Surface Pro 7 Screen Replacement: Schritt 5, Bild 2 von 3 Microsoft Surface Pro 7 Screen Replacement: Schritt 5, Bild 3 von 3

    • Remove from old screen to the new

    Übersetzen

  7. Microsoft Surface Pro 7 Screen Replacement: Schritt 6, Bild 1 von 1

    • Test device before putting adhesive down

    • Test wifi, bluetooth and screen of course

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

30 weitere Nutzer:innen haben diese Anleitung absolviert.

24 Kommentare

Can you recommend a specific seller for the display, I’ll need to replace my screen before long. Thanks!

Eric Fike - Antwort

What type of glue for reassembly? What temperature of heat setting do you recommend?

Anthony Finch - Antwort

I managed to remove the old screen, clean off the old adhesive, apply new adhesive but not remove the backing yet. I connected the new screen and cables back the original way. I then uninstalled the touch drivers and restarted the surface. The touch function on the screen is still not working, any furthur suggestions?

Bryce Stevenson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 56

Letzte 7 Tage: 364

Letzte 30 Tage: 1,664

Insgesamt: 64,886