Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement

Einleitung

Use this guide to replace a damaged gearcase insulator on a Milwaukee Reciprocating Saw 6538-21-B36B (2010).

The gearcase insulator is a component that protects the gear case in power tools. It helps prevent damage to the gear case by providing a layer of insulation and cushioning if damaged use this guide if it needs to be repaired.

Schritt 1 Gearcase Insulator

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: Schritt 1, Bild 1 von 2

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: Schritt 1, Bild 2 von 2

Pull up on the shoe release lever until it's perpendicular to the gearcase insulator.

Übersetzen

Schritt 2

Pull the shoe assembly out from the saw.

Übersetzen

Schritt 3

Remove the gearcase insulator by folding over the rubber, dislodging the insulator from the red shift lever, and pulling it off.
Using the screwdriver to help lift the rubber over the lever and folding it over may be helpful.

Übersetzen