Einleitung

The Minolta Dimage Xt requires an SD card to operate. If the card's memory is full, the SD card must be removed from the camera so it's pictures can be exported. Once the card is empty, it can be reinserted.

  1. Locate the latch labeled BATT SD CARD on the right side of the camera.
    • Locate the latch labeled BATT SD CARD on the right side of the camera.

    • Push the latch in the direction of the arrow, and it will spring open.

    Kommentar hinzufügen

  2. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

  3. Insert the SD card into the smaller of the two slots.  The metallic connectors should enter the camera first and the label of the SD card can be seen from a front view of the camera.
    • Insert the SD card into the smaller of the two slots. The metallic connectors should enter the camera first and the label of the SD card can be seen from a front view of the camera.

    • Push the card all the way into the slot until there is a click, and the card stays in place.

    • To remove the SD card, push the card down and release. The card will pop up and can be pulled the rest of the way out.

    Kommentar hinzufügen

Abschluss

When the card has been removed/inserted, push the latch down, and it will lock into place.

Megan Milam

Mitglied seit 11.03.2013

28 Reputation

5 Anleitungen geschrieben

Team

Clemson, Team 12-4, Benson Spring 2013 Mitglied von Clemson, Team 12-4, Benson Spring 2013

CLEM-BENSON-S13S12G4

3 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 5

Insgesamt: 576